Mazda B-Series Starting problems

16 messages, Last post on Nov 23, 2009 at 1:37 PM

You are in the Mazda B-Series Forum. Your Host is kcram

#14 of 16 Re: Another starting problem [alnotatwork] by lmoreno3 Jun 16, 2009 (6:31 pm)
Replying to: alnotatwork (Oct 13, 2008 5:13 pm) I was having the same problems with my '90 Mazda B2200. I found out that the problem was with the ignition key cylinder harness. I removed the steering wheel shroud then pulled and pushed on the ignition harness with my left hand, while turning the key with my right. The truck started right up. I did this for several weeks, until I noticed that the only bolt that holds the harness into the key cylinder, was a little too long. Got ahold of another one just a tad shorter and replaced the bolt. Truck now starts everytime I turn the key. Replacement harness costs about $100.00. The bolt only cost me 5 cents. Good luck and hope this helps.
#15 of 16 no spark by bumbed Jul 19, 2009 (12:15 pm)
replaced coil and ign. module, but still nothing out of ign. coil. also new rotor cap , wires and rotor button. anybody got an ideas?
#16 of 16 wont start in cold weather by kew_bugg Nov 23, 2009 (1:37 pm)
done posted this i thought but cant find it now,,, 1991 b2600 cranks easy in weather temps above 70 degress ,,wont start without either if temp is lower