4Runner Starter

4 messages, Last post on Aug 18, 2008 at 5:06 AM

You are in the Toyota 4Runner Forum. Your Hosts are steve_ & tidester

What is this discussion about? Toyota 4Runner, Electrical, SUV

#2 of 4 Starter by mike805 Aug 15, 2008 (5:14 am)
Sounds like the solenoid is not engaging. I assume it has been replaced with the starter, if not that is your problem. If the solenoid is being replaced each time I would look at the flywheel. There may be a tooth bent or missing that is causing the problem. Replies to this message: rmccook (Aug 15, 2008 5:52 am) mike805 (Aug 18, 2008 5:06 am)
#3 of 4 Re: Starter [mike805] by rmccook Aug 15, 2008 (5:52 am)
Replying to: mike805 (Aug 15, 2008 5:14 am) When I get the starter at NAPA it comes in a box. Is the solenoid a separate part? Replies to this message: mike805 (Aug 18, 2008 5:06 am)
#4 of 4 Re: Starter [rmccook] by mike805 Aug 18, 2008 (5:06 am)
Replying to: rmccook (Aug 15, 2008 5:52 am) I am not familiar with the 1990 version. In the 2007 manual it is all one assembly. The solenoid is what engages the starter motor to the flywheel and is mounted on the side of the motor (For 2007 it is called the "repair service starter kit" ). The name makes no sense to me. You can disassemble the solenoid from the starter motor but if it came as an assembly you got a new one with the starter.