67 messages,
Last post on Feb 16, 2013 at 11:29 PM
You are in the
Mazda CX-7 Forum.
What is this discussion about?
Mazda CX-7, SUV
#62 of 67 Re: 2008 CX-7 AWD Vibration [maavalous]
by pr2008cx7
Jul 18, 2011 (12:45 pm)
I had the same or typically that same problem. Mazda had to replace the drive shaft that goes from the transmission to the rear drive.
Before they did that they did same repairs they did to yours.
#64 of 67 Mazda CX-7 Wheel bearing/hub = vibration
by taz6
Dec 23, 2012 (2:53 pm)
Been getting an increasing vibration noise from the transmission area of my 2007 CX-7 GT AWD with 69K. Increases under load, but diminishes when turning right. Not affected by braking or placing vehicle in neutral. Mechanic took a quick ride and then put it on the lift and showed me the laterial movement (side to side) in the left rear wheel. Looked like the lug nuts were loose, but he said the left rear wheel bearing is no good and it a requires a full hub assembly replacement. Then he adds the right rear is worn also, not as bad, and suggests both be replaced for safety. been checking around and this seems to be a common Mazda problem. Anyone else?
#65 of 67 Re: Mazda CX-7 Wheel bearing/hub = vibration [taz6]
by scastellari
Feb 16, 2013 (11:29 pm)
changed wheel bearings at 75,000