94 Chevy Blazer 4x4 light flashes

7 messages, Last post on Dec 08, 2009 at 7:57 PM

You are in the Chevrolet Blazer Forum. Your Hosts are steve_ & tidester

What is this discussion about? Chevrolet S-10 Blazer, SUV

#4 of 7 Re: 94 blazer 4x4 flashes [will_ss] by woodsman3 Dec 10, 2008 (4:39 pm)
Replying to: will_ss (Jul 28, 2008 7:53 am) You might have a couple problems, look and see if you have a vacuum switch in the middle of your fire wall, make sure all hoses are connected. Check and see if there are any vacuum leaks. Then if that does not fixe it your push button pad assembly might be bad. Good Luck
#5 of 7 1998 chevy s10 blazer clicking under steering column by waterggoo Apr 19, 2009 (10:48 pm)
When I apply the brakes and sometimes while driving I hear a repeatedly clicking under the steering column. sounds like a flasher
#6 of 7 1994 S10 Blazer by lrosetto May 26, 2009 (7:20 pm)
i am trying to set my timing but can not find the one wire you have to disconnect before you use a timing light (help please).4.3 vortex I have it set now with 18 inches of vaccumm and it is running great but would still like to check with light.
#7 of 7 1999 CHEVY S-10 BLAZER 4X4 LIGHTS FLASH AND DOESNT ENGAGE by nitrodude Dec 08, 2009 (7:57 pm)
bought this car for my 16 yr old daughter and when I bought the vehicle in July I tried the 4 wheel HI and LO and it did work . Now we got the first snow fall and it doesnt engage but no matter how I try to put it in the 4 wheel drive all that happens is the light just flashes on the switch, no matter what HI, LO or ALL WHEEL DRIVE and of course she ended up in the ditch from inexperience driving NEED TO TRY TO FIX THIS ANY HELP WOULD BE NICE THANK YOU