Sign In Join 



Bonneville Radio Display

9 messages,  Last post on Apr 16, 2009 at 7:53 AM

You are in the Pontiac Bonneville Forum. Your Hosts are pat & karens

What is this discussion about? Pontiac Bonneville, Electrical, Sedan


Messages Page 1 of 1
All Messages Displayed
Go To Msg #
Search This Discussion

#1 of 9
Bonneville Radio Display by ltkettch17
Jul 24, 2008 (11:52 am)
Reply
My 02 SE's radio display is fading, does anyone know of a quick fix for this situation?
 
Am I doomed to never see the left 2/3's of my screen again?
#2 of 9
Re: Bonneville Radio Display [ltkettch17] by ajgaffer
Aug 03, 2008 (4:26 am)
Reply

Replying to: ltkettch17 (Jul 24, 2008 11:52 am)

Bad news......
 
I have a 00 SE and have not seen the radio display in years. Was told it was the LCD screen but big bucks (labor intensive) to pull dash apart and replace.
 
If you find an easier solution, please share.
#3 of 9
Radio removal by imidazol97
Aug 03, 2008 (5:12 am)
Reply
Isn't the radio actually an easy item to get to? They are modular. You can buy rebuilt ones on Ebay probably. I know there are people who rebuild the digital ECC units where the display numbers weaken (some are due to poor solder contacts on a subcircuit board that some people resolder themselves).
 
I just checked and found a picture where the plastic around the radio is pried off. The radio is held in by 4 spring clips--they don't even used screws anymore!!!
 
If your carspace page mailbox is set up, I'll send you a link for some pictures of how it's done. If not search Ebay. But you can take your own radio out and send it for exchange or whatever you find. Some people who do this on Ebay, e.g., have a customer friendly method of handling stuff.
#4 of 9
Light behind Bonne radio display by debbiec1
Sep 26, 2008 (9:58 am)
Reply
These tend to burn out after 5 yrs or so and my cousin replaired his for his mom and dad's Bonne. Now ours is going out too and he said he pulled the radio, popping the dash and then taking out 4 screws, (theirs was a 97) and sent it to a place he got from ebay, radio repair dot com or something like that. They have pictures of the various radios and replace the bulb and send it back for like 39 bucks postpaid. MUCH better than dealer estimate.
So this is a common repair and sounds like an easy one to do at home.... but I haven't tried it yet because my daughter would rather be looking at a darkened digital clock than be without her music for a whole week......
 
and by the way, everyone who has one loves these cars.... No one gets just one.
#5 of 9
Part of radio display out by inocean
Oct 13, 2008 (12:23 pm)
Reply
Hi. This is my first post to this forum. I just bought a used 2001 Bonneville and half of the display on the radio is out. I believe the bulbs behind the display may be out. I want to try replacing the lights/LEDs but if I disconnect the radio, and then reconnect it later, will that lock the radio? I do not have any locking codes, so I'm afraid to disconnect the radio.
Also is there a way to find the locking code on my radio just in case I need it later?
Thanks.
#6 of 9
Radio Display by lyndalou
Apr 15, 2009 (4:05 pm)
Reply
My display went out in my 99' Bonneville, and I fixed it myself. It took a bit of searching for the right bulb, but with some help from my local dealer, we were able to order one. Shipping cost more than the bulb, but the total was only about $10. Just make sure you don't have the radio "locked" before you take it out and apart.
#7 of 9
04 Grand Prix ragio removal by dcnewell
Apr 16, 2009 (7:37 am)
Reply
How do you remove a radio-cd player without ruining the plastic around it?
#8 of 9
Re: Radio Display [lyndalou] by imidazol97
Apr 16, 2009 (7:51 am)
Reply

Replying to: lyndalou (Apr 15, 2009 4:05 pm)

Various bulbs can be made to work from Radio Shack's assortment. I've seen descriptions of how people have done these.
#9 of 9
Re: 04 Grand Prix ragio removal [dcnewell] by imidazol97
Apr 16, 2009 (7:53 am)
Reply

Replying to: dcnewell (Apr 16, 2009 7:37 am)

The wood-like plastic trim strips typically pop out. Gentle test around different spots. It helps if you find a description with pictures that someone puts up that shows exactly how for your type car. And yours is in a console rather than the dash like I'm used to on H-bodies.

Messages Page 1 of 1
All Messages Displayed
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement