- #36 of 59
-
Re: SkySlider on 09LibbyLimited [lasersam]
by gtangjr
-
Jan 27, 2009 (5:29 pm)
-
|
|
Replying to: lasersam (Jan 27, 2009 5:23 pm)
I know for certain (per my dealer) the new parts have been implemented.
|
- #37 of 59
-
Re: FINALLY FIXED!!!!!!!! [gtangjr]
by pdcingso
-
Feb 02, 2009 (12:57 pm)
-
|
|
Replying to: gtangjr (Oct 23, 2008 2:33 pm)
I am haveing the same problem, I have an appointment Wednesday with the dealer, any updates? Part numbers???
|
- #38 of 59
-
Re: FINALLY FIXED!!!!!!!! [pdcingso]
by a35242
-
Feb 09, 2009 (6:41 am)
-
|
|
Replying to: pdcingso (Feb 02, 2009 12:57 pm)
I am having the same issues and have to bring my Liberty 08 in for them to look at again. Originally, they flashed the computer and it seemed to work better but then it just loosened up again and there was horrible noise. They say they read all of the latest Service Bulletins so if you have anymore specifics on what the part actually is or more of an explanation that would help alot. this is so frustrating.
|
- #39 of 59
-
Re: FINALLY FIXED!!!!!!!! [a35242]
by 210win
-
Feb 10, 2009 (10:53 pm)
-
|
|
Replying to: a35242 (Feb 09, 2009 6:41 am)
I had the same problem,and fixed it by dealer last week. There is no noise so far. The parts # are 68057092AA which is Bow-Folding Top,and 68038578AA which is Grease-Nyogel 729F. Of course it was free to fix.
|
- #40 of 59
-
Re: FINALLY FIXED!!!!!!!! [210win]
by a35242
-
Feb 12, 2009 (5:56 am)
-
|
|
Replying to: 210win (Feb 10, 2009 10:53 pm)
Thanks for the update. This should help out a lot and I am taking it in today for them to look at it. With this information I know they wont BS me and it will save me a lot of time and headach. Will keep everyone posted on the developments.
|
- #41 of 59
-
Re: FINALLY FIXED!!!!!!!! [a35242]
by a35242
-
Feb 13, 2009 (5:32 am)
-
|
|
Replying to: a35242 (Feb 12, 2009 5:56 am)
I took the information gathered from here and the ordered the part. It was called a header kit. I am hoping this will work and will keep you posted
|
- #42 of 59
-
Re: FINALLY FIXED!!!!!!!! [a35242]
by jimgreiner
-
Feb 13, 2009 (6:43 am)
-
|
|
Replying to: a35242 (Feb 13, 2009 5:32 am)
Hate to disappoint all of you following this thread, but I had this latest fix (replacing header) done around 3000 miles ago... at the time it was done the wind noise was greatly reduced, with only a little noise coming from the passenger side of the skyslider... over the past 3000 miles however, the noise has gradually increased to the point it's as noisy as it was before the repair... Again, another CHEEP (CHryslerjEEP) repair... time to get the lemon law lawyers involved 
|
- #43 of 59
-
Re: SkySlider on 09LibbyLimited [lasersam]
by srotag
-
Feb 17, 2009 (1:17 pm)
-
|
|
Replying to: lasersam (Jan 27, 2009 5:23 pm)
I also purchased an "09" Liberty with a "skyslider" roof. Noise is not the right word for it. I'm assuming that Chrysler/Jeep didn't learn nor try to fix the problem for the 2009 model year. Noted to my dealer that there is a Blt. from Chrysler Jeep concerning this problem but his response was "it was or the 2008 model therefor not applicable to the 2009 model". DUH. I guess I too need to contact whomever about the "Lemon Law". Dealer Service Rep did say he had the same problem but to date has not found a solution for it other than a fixed air dam in front of the opening (none sold by JEEP fit this situation) nor offered on the open market. And you wonder why the BIG THREE are having a hard time selling their products...
|
- #44 of 59
-
Re: FINALLY FIXED!!!!!!!! [jimgreiner]
by a35242
-
Feb 27, 2009 (6:39 am)
-
|
|
Replying to: jimgreiner (Feb 13, 2009 6:43 am)
So, are you able to go back and get the header kit replaced again? There does not seem to be any other solutions out there that I have heard of. Let me know if you find anything out about the Lemon Law with this situation because it is definately frustrating for sure.
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs 
