- #32 of 59
-
Re: FINALLY FIXED!!!!!!!! [ahck123]
by gtangjr
-
Jan 19, 2009 (5:57 pm)
-
|
|
Replying to: ahck123 (Jan 19, 2009 5:46 pm)
It is a shame that your dealer (as well as the commenter above you) isn't working with you on this and instead chooses to be confrontational. Our dealership was excellent. We still have ZERO problems with our roof following my post about the matter finally being fixed. At 80-90 MPH the noise is perfectly what one would expect with a cloth roof, and is in fact quieter than that of our 2006 Solara Convertible with the top up.
I would recommend having your dealer call my dealer, David Ellis Chrysler Jeep in Canoga Park, CA. Have them talk to Kenny in service. He is wonderful, but I should warn you he is usually very busy and difficult to get in touch with. Again, I would have the dealer call so it's a lot less frustrating to my dealer, as opposed to several customers from seemingly out of nowhere. BEST OF LUCK!
|
- #33 of 59
-
Re: Noisy SkySlider Roof at approximately 70MPH!!! [ahck123]
by cmoa84
-
Jan 19, 2009 (6:00 pm)
-
|
|
Replying to: ahck123 (Jan 19, 2009 5:40 pm)
Ive beed dealing with the same problem since last year and they are telling me the same thing .. "that noise is normal" ... But the thing is that when I bought the car it wasnt doing that noise at all.
Hopefully we can find a solution for this problem...
|
- #34 of 59
-
Re: Noisy SkySlider Roof at approximately 70MPH!!! [cmoa84]
by gtangjr
-
Jan 19, 2009 (6:12 pm)
-
|
|
Replying to: cmoa84 (Jan 19, 2009 6:00 pm)
Your issue is consistent with the loosening of whatever part it was that my dealer fixed. It's likely just a matter of them doing it correctly. Also, your early fix could have been done with older parts, which were subsequently recalled for their ineffectiveness. There is a newer part that I had to wait a long time for. Read this thread in its entirety for complete information. Good luck.
|
- #35 of 59
-
SkySlider on 09LibbyLimited
by lasersam
-
Jan 27, 2009 (5:23 pm)
-
|
|
Just purchased an 09 with SkySlider. No noise or issues yet... I wonder if the 09's had the new parts installed at the factory. Anyone know?
|
- #36 of 59
-
Re: SkySlider on 09LibbyLimited [lasersam]
by gtangjr
-
Jan 27, 2009 (5:29 pm)
-
|
|
Replying to: lasersam (Jan 27, 2009 5:23 pm)
I know for certain (per my dealer) the new parts have been implemented.
|
- #37 of 59
-
Re: FINALLY FIXED!!!!!!!! [gtangjr]
by pdcingso
-
Feb 02, 2009 (12:57 pm)
-
|
|
Replying to: gtangjr (Oct 23, 2008 2:33 pm)
I am haveing the same problem, I have an appointment Wednesday with the dealer, any updates? Part numbers???
|
- #38 of 59
-
Re: FINALLY FIXED!!!!!!!! [pdcingso]
by a35242
-
Feb 09, 2009 (6:41 am)
-
|
|
Replying to: pdcingso (Feb 02, 2009 12:57 pm)
I am having the same issues and have to bring my Liberty 08 in for them to look at again. Originally, they flashed the computer and it seemed to work better but then it just loosened up again and there was horrible noise. They say they read all of the latest Service Bulletins so if you have anymore specifics on what the part actually is or more of an explanation that would help alot. this is so frustrating.
|
- #39 of 59
-
Re: FINALLY FIXED!!!!!!!! [a35242]
by 210win
-
Feb 10, 2009 (10:53 pm)
-
|
|
Replying to: a35242 (Feb 09, 2009 6:41 am)
I had the same problem,and fixed it by dealer last week. There is no noise so far. The parts # are 68057092AA which is Bow-Folding Top,and 68038578AA which is Grease-Nyogel 729F. Of course it was free to fix.
|
- #40 of 59
-
Re: FINALLY FIXED!!!!!!!! [210win]
by a35242
-
Feb 12, 2009 (5:56 am)
-
|
|
Replying to: 210win (Feb 10, 2009 10:53 pm)
Thanks for the update. This should help out a lot and I am taking it in today for them to look at it. With this information I know they wont BS me and it will save me a lot of time and headach. Will keep everyone posted on the developments.
|
- #41 of 59
-
Re: FINALLY FIXED!!!!!!!! [a35242]
by a35242
-
Feb 13, 2009 (5:32 am)
-
|
|
Replying to: a35242 (Feb 12, 2009 5:56 am)
I took the information gathered from here and the ordered the part. It was called a header kit. I am hoping this will work and will keep you posted
|