- #31 of 59
-
Re: FINALLY FIXED!!!!!!!! [gtangjr]
by ahck123
-
Jan 19, 2009 (5:46 pm)
-
|
|
Replying to: gtangjr (Oct 23, 2008 2:33 pm)
i am completely frustrated with my slider roof. I have been trying for 19 days to get some resolution to the noise issue. I dont know if you are talking about the bow as the part that was replaced that fixed your issue but they did that already with mine and it has not helped. My vehicle starts to be noisy and whistle at 35-40 mph and gets worse from there up. At 65-70 it is unbearable and you ahve to turn the radio way up and practically scream at people in the backseat. i am especially frustrated since my dealer was told by a Chrysler engineer that replacing the bow would not fix the problem...they went ahead and did it and now are saying it is fixed and that the remaining noise is just noise from a cloth top! I asked about this problem during the test drive prior to purchase and was told it was a minor adjustment. It certainly hasn't been a minor adjustment and I would never have bought the vehicle if the salesperson had not assured me that the minor adjustment would resolve the noise. I will contact the dealer you mentioned. thanks maybe your fix is a different fix.
|
- #32 of 59
-
Re: FINALLY FIXED!!!!!!!! [ahck123]
by gtangjr
-
Jan 19, 2009 (5:57 pm)
-
|
|
Replying to: ahck123 (Jan 19, 2009 5:46 pm)
It is a shame that your dealer (as well as the commenter above you) isn't working with you on this and instead chooses to be confrontational. Our dealership was excellent. We still have ZERO problems with our roof following my post about the matter finally being fixed. At 80-90 MPH the noise is perfectly what one would expect with a cloth roof, and is in fact quieter than that of our 2006 Solara Convertible with the top up.
I would recommend having your dealer call my dealer, David Ellis Chrysler Jeep in Canoga Park, CA. Have them talk to Kenny in service. He is wonderful, but I should warn you he is usually very busy and difficult to get in touch with. Again, I would have the dealer call so it's a lot less frustrating to my dealer, as opposed to several customers from seemingly out of nowhere. BEST OF LUCK!
|
- #33 of 59
-
Re: Noisy SkySlider Roof at approximately 70MPH!!! [ahck123]
by cmoa84
-
Jan 19, 2009 (6:00 pm)
-
|
|
Replying to: ahck123 (Jan 19, 2009 5:40 pm)
Ive beed dealing with the same problem since last year and they are telling me the same thing .. "that noise is normal" ... But the thing is that when I bought the car it wasnt doing that noise at all.
Hopefully we can find a solution for this problem...
|
- #34 of 59
-
Re: Noisy SkySlider Roof at approximately 70MPH!!! [cmoa84]
by gtangjr
-
Jan 19, 2009 (6:12 pm)
-
|
|
Replying to: cmoa84 (Jan 19, 2009 6:00 pm)
Your issue is consistent with the loosening of whatever part it was that my dealer fixed. It's likely just a matter of them doing it correctly. Also, your early fix could have been done with older parts, which were subsequently recalled for their ineffectiveness. There is a newer part that I had to wait a long time for. Read this thread in its entirety for complete information. Good luck.
|
- #35 of 59
-
SkySlider on 09LibbyLimited
by lasersam
-
Jan 27, 2009 (5:23 pm)
-
|
|
Just purchased an 09 with SkySlider. No noise or issues yet... I wonder if the 09's had the new parts installed at the factory. Anyone know?
|
- #36 of 59
-
Re: SkySlider on 09LibbyLimited [lasersam]
by gtangjr
-
Jan 27, 2009 (5:29 pm)
-
|
|
Replying to: lasersam (Jan 27, 2009 5:23 pm)
I know for certain (per my dealer) the new parts have been implemented.
|
- #37 of 59
-
Re: FINALLY FIXED!!!!!!!! [gtangjr]
by pdcingso
-
Feb 02, 2009 (12:57 pm)
-
|
|
Replying to: gtangjr (Oct 23, 2008 2:33 pm)
I am haveing the same problem, I have an appointment Wednesday with the dealer, any updates? Part numbers???
|
- #38 of 59
-
Re: FINALLY FIXED!!!!!!!! [pdcingso]
by a35242
-
Feb 09, 2009 (6:41 am)
-
|
|
Replying to: pdcingso (Feb 02, 2009 12:57 pm)
I am having the same issues and have to bring my Liberty 08 in for them to look at again. Originally, they flashed the computer and it seemed to work better but then it just loosened up again and there was horrible noise. They say they read all of the latest Service Bulletins so if you have anymore specifics on what the part actually is or more of an explanation that would help alot. this is so frustrating.
|
- #39 of 59
-
Re: FINALLY FIXED!!!!!!!! [a35242]
by 210win
-
Feb 10, 2009 (10:53 pm)
-
|
|
Replying to: a35242 (Feb 09, 2009 6:41 am)
I had the same problem,and fixed it by dealer last week. There is no noise so far. The parts # are 68057092AA which is Bow-Folding Top,and 68038578AA which is Grease-Nyogel 729F. Of course it was free to fix.
|
- #40 of 59
-
Re: FINALLY FIXED!!!!!!!! [210win]
by a35242
-
Feb 12, 2009 (5:56 am)
-
|
|
Replying to: 210win (Feb 10, 2009 10:53 pm)
Thanks for the update. This should help out a lot and I am taking it in today for them to look at it. With this information I know they wont BS me and it will save me a lot of time and headach. Will keep everyone posted on the developments.
|