48 messages,
Last post on Jul 30, 2010 at 10:37 PM
You are in the
Mitsubishi Outlander Forum.
What is this discussion about?
Mitsubishi Outlander, Car Buying, Audio, SUV
#18 of 48 Bluetooth password issue
by erik06
Jun 09, 2009 (12:12 pm)
Hi,
I bought a used Mitsubishi outlander "from Feb 2008", when trying to enable Bluetooth I got the message that "Bluetooth is locked and I have to enter the password". Unfortunately the dealer did not know the code and don't know how to reset it.
I tried the 0000, 1111 and 9999 but does not work.
Is there a way to reset the Bluetooth code, any help would be very much appreciated.
Thanks in advance,
Erik
#19 of 48 Re: Bluetooth password issue [erik06]
by comem47
Jun 09, 2009 (12:52 pm)
Is this a Mitsu dealer or just a used car at another type car dealer? Usually as a worst case scenario, there is a way to reset "all" settings to factory defaults(probably no password is set) and the Mitsu dealer should know. I personally have not done anything with Bluetooth, sorry.
#20 of 48 Bluetooth password issue
by erik06
Jun 09, 2009 (1:20 pm)
It's a Mitsubishi dealer, but apparently he don't know how to proceed. He told me that he will check. In the mean time I'm trying to find out how to do it, but apparently no one knows
Thks,
Erik
#21 of 48 Re: Bluetooth password issue [erik06]
by coolguy949
Jun 11, 2009 (5:01 pm)
- Turn ignition to the on position
- Press and hold the hang up button for 2 seconds (do this 3 times total back-to-back) - the whole process should take more than 10 seconds
- Press the speak button to see if it asks you for the password - if not, problem solved.
#22 of 48 Re: Bluetooth password issue [coolguy949]
by erik06
Jun 12, 2009 (11:49 am)
I tried this also without success. I think that the dealer will have to order a new Bluetooth module. He should call me on next week.
#23 of 48 Re: Bluetooth password issue [erik06]
by coolguy949
Jun 12, 2009 (1:31 pm)
Keep trying. There is no confirmation when it happens. You just have to hit the speak button to see if it works.
It completely resets the bluetooth module back to factory settings. It should work. I had the same problem.
Wait 1 second between each button push. So it should be
Push end call button for two seconds
wait 1 second
repeat two more times
#24 of 48 Re: Bluetooth password issue [coolguy949]
by erik06
Jun 12, 2009 (3:15 pm)
Ok will try again tomorrow.
when you say ignition button to on "what is this !" it's not the speak Bluetooth
button?
thks
#25 of 48 Re: Bluetooth password issue [erik06]
by coolguy949
Jun 12, 2009 (4:27 pm)
Put the key in the ON position first, then start the procedure. The speak button is the one on the left that you use to activate bluetooth functions.
#26 of 48 Re: Bluetooth password issue [coolguy949]
by erik06
Jun 14, 2009 (5:08 am)
I tried .... tried ... re-tried without luck.... I think that I will have to ask for Bluetooth module replacement. The car is still under warranty.
#27 of 48 Re: Bluetooth password issue [erik06]
by coolguy949
Jun 14, 2009 (7:40 am)
Keep trying.....
Just kidding. Yeah, time for warranty. Very weird.