Last post on Aug 02, 2010 at 1:19 PM
You are in the Subaru Forester
What is this discussion about?
Subaru Forester, Engine, Wagon
#2 of 31 Re: 2008 Subaru Forester Design Flaw [fsb]
Jun 10, 2008 (7:53 am)
I doubt they're all like that, though I have not driven a 2008 specifically.
Call 800-SUBARU3 and open up a case. They can help your dealer get to the bottom of this.
The ECU sets the idle speed, so I bet one of the inputs is malfunctioning - a sensor or something.
#3 of 31 Re: 2008 Subaru Forester Design Flaw [ateixeira]
Jun 10, 2008 (8:23 am)
The XT I drive does not have this oscillation. A/C on will raise idle slightly.
As Ateixeria mentioned, could be bad sensor or faulty ECU.
If dealer gives no satisfaction and no other dealers are available, try opening case with Subaru.
#4 of 31 Re: 2008 Subaru Forester Design Flaw [fsb]
Jun 10, 2008 (12:10 pm)
Tried duplicating this on each of the 3 Foresters I've got sitting in my lot & couldn't. I wonder, though: You've got "Incline Assist" with a manual ~ it does not specifically STATE it in any of my documentation, but I wonder if in addition to applying the brakes momentarily, it also raises the engine rpm if the clutch is depressed on an incline....ARE you on an incline while this happens?
#5 of 31 Re: 2008 Subaru Forester Design Flaw [epgolfs]
Jun 10, 2008 (3:33 pm)
I can't see the hill-holder feature having any effect on the idle speed, it's merely keeping the brakes applied for you.
There's definitely something not working right though, the idle on a warm engine should hold steady at 750 rpm, regardless of whether it's in gear or not.
#6 of 31 Re: 2008 Subaru Forester Design Flaw [ateixeira]
Jun 10, 2008 (9:45 pm)
Thanks for your reply ateixeira,
The dealership mechanic who worked on the problem, having exausted everything he could think of, did open a case with Subaru. But they weren't able to help him.
#7 of 31 Re: 2008 Subaru Forester Design Flaw [p0926]
Jun 10, 2008 (9:54 pm)
I don't know if it matters, but my Forester is a PZEV (Partial Zero Emission Vehicle).
The problem can be duplicated at will and occurs any time I push in the clutch while I'm in motion in any gear, incline, or speed, with or without air conditioning.
#8 of 31 Re: 2008 Subaru Forester Design Flaw [fsb]
Jun 11, 2008 (11:14 am)
My 08 Forester does not have this flaw. But it's a non-PZEV automatic.
#9 of 31 Re: 2008 Subaru Forester Design Flaw [fsb]
Jun 11, 2008 (12:56 pm)
We did get a PZEV, but the idle is smooth. Just got it last night so I'll pay close attention to how it idles tonight.
#10 of 31 Re: 2008 Subaru Forester Design Flaw [ateixeira]
Jun 11, 2008 (4:57 pm)
Get your ecu re-flashed. I had messed with an ECU modifying program on my 05 LGT and the same thing happened. I reflashed the ecu and it fixed it up for me.
#11 of 31 idle cycle
by johnv STAFF
Jun 26, 2008 (6:08 pm)
I think I've seen the same thing in my 2008. Does it stop when the car comes to a complete stop? I see this when I'm coasting in gear, clutch in towards a stop sign. Stops as soon as I stop rolling.