Last post on Feb 06, 2010 at 1:31 PM
You are in the Chrysler/Plymouth Voyager, Dodge Caravan
What is this discussion about?
Dodge Caravan, Chrysler Voyager, Plymouth Voyager, Van
#5 of 13 Help Removing crankshaft gear
Mar 21, 2009 (7:36 am)
I need to know how to remove the crankshaft timing pulley on a 1992 Camry. I want to remove the oil pump so I can take out the oil seal which is stuck.
Here is what I tried:
- tried using the two screw driver method to remove the seal after taking off the face of the oil pump. I was told it should come out easy but it is stuck.
- now I am attempting to take off the oil pump and see if I can just knock out the seal that way
Note: I don't have the special tool to remove the crankshaft pulley.
Question: Is there a way to remove the pulley without the tool?
Or is there a better way to achieve my objective(getting out the oil seal)?
I am not a mechanic but am not afraid to learn.
Can someone help?
#6 of 13 Re: Help Removing crankshaft gear [knightcamry]
Mar 21, 2009 (9:31 am)
The first thing you might want to do is to post over in a Camry related topic, this discussion is for Chrysler minivans.
#7 of 13 Audi A6 Oil Pump
Jul 16, 2009 (2:58 am)
2006 model - 85,000 miles - automatic. Full service history with authorised dealer. Timing belt replaced in June. Oil pump failed for no appearant reason. Have been advised that the engine need to be replaced. Has anybody experienced this problem?
Nov 16, 2009 (7:31 am)
where is the oil pump located on a 2004 tracker and how to change it?
#10 of 13 Re: Jacqueline147 [jacqueline147]
Nov 16, 2009 (8:51 am)
Note to the moderators: We might need to shut this topic down as these minivans have few if any problems with their oil pumps, that and it seems that we are getting requests about unrelated vehicles made by other companies.
#12 of 13 Re: Jacqueline147 [shipo]
by Karen@Edmunds HOST
Nov 16, 2009 (11:13 am)
I edited the title so that it refers strictly to the Caravan/Voyager. That should help with the confusion.
#13 of 13 oil light goes on
Feb 06, 2010 (1:31 pm)
I have a 1998 van with 3.3 motor. the oil light goes on , but the engine runs fine. no noise or knock. I changed the sending unit but still happens. is there a second oil port that I can hook up a oil gauge instead of the light?