- #168 of 209
-
Re: Truck wouldn't start all electrical seems to be working fine! [court1980]
by tuggajb
-
Jul 26, 2009 (4:22 pm)
-
|
|
Replying to: court1980 (Jul 26, 2009 10:05 am)
fiest thing i would change is ignion switch
|
- #169 of 209
-
Re: '97 Jeep Grand Cherokee-Battery draw [trekker3]
by carolyn996
-
Aug 19, 2009 (6:51 pm)
-
|
|
Replying to: trekker3 (Mar 27, 2009 11:01 am)
Hi, I owned a 1994 Jeep Grand Cherokee for 11 yrs and am still sorry I sold it. Even worse that I replaced it with a 2005 which has big time electrical problems on the gauges,heat,blower and signals. Anyway back to your problem. My Jeep would start fine all week when I drove to work but come Monday morning if it sat all weekend the battery was dead and it would not start. Same thing happened while on vacation on Northern Mich after it sat all week. When I took it to the dealer it turned out that I had too many maps in the glove box which was causing a slow draw on the battery as the glove box light stayed on ( and I could obviously not see this with the glove box closed). I took all the maps out of the glove box and never had the problem again. Good Luck Carolyn996
|
- #170 of 209
-
Problem with UConnect in my 2005 Jeep Grand Cherokee
by nolefan9399
-
Aug 21, 2009 (11:24 am)
-
|
|
OK first the dumb part of this topic. A few weeks ago I took my Grand Cherokee with a sunroof through the car wash. I noticed water coming through by the headliner and quickly found out you don't take vehicles with sunroofs through the car wash. Almost immediately after that my UConnect which is the mirror mounted type quit working. My question is is there a fuse or relay that could have possibly tripped in the system causing it not to work? I have looked around and can't find any wiring diagrams for this system. Help please!
|
- #171 of 209
-
Re: A VERY ANNOYING ELECTRICAL PROBLEM [mrduck53]
by 96jeep2
-
Aug 24, 2009 (2:41 pm)
-
|
|
Replying to: mrduck53 (May 26, 2008 7:50 pm)
i have a 1996 jeep grand cherokee 200,000+, i bought a obd2 scanner for my car it give me a few error code one of the code is p0350 witch is no cam shaft poss sensor signal at the pcm. if this happens the pcm dose 2 things. 1st it shuts down the relay for your ignition/fuel pump 2nd it shuts down the relay for your ASD (atuo-shut-down replay) both shuts off your car while driveing or doing anything. this could be fix 1-2 different things pcm, needs to be reprogramed (not istalling a new one) must be reprogramed, cam sensor needs to be replaced. The best advised i could give any one that has a jeep and wants to keeps it, is..... go get your self a hanye's book on your car and do it your self, it's lest expencive, and your learn how to SOLVE issues. Did you know that a kit to repair a transmition is only 200.00$$$. and when you bring your car to get serviced they charge you oohh any were from 1200-2200 depends on the probolem. Ill help anybody that needs it just ask, i am not a mecahnic just a well informed jeep owner.
|
- #172 of 209
-
Re: New battery keeps draining. [parist21]
by 96jeep2
-
Aug 24, 2009 (3:06 pm)
-
|
|
Replying to: parist21 (Jun 29, 2009 8:07 pm)
If your not leaving any thing on in the car, thus causeing your battery to be drained, then its not getting a good recharge, i would take a look at the alternator.
|
- #174 of 209
-
1999 jeep grand cherokee Electrical Problems 4.0
by dayneseditz
-
Aug 25, 2009 (2:39 am)
-
|
|
well i get in it the morning or whenever and sometimes it ackes like it dead then i turn the key off and try again and nothing turn the key back off and the gauges go nuts back and fortht. but lately after that the car starts right up but before i would half to reset the battery to get going any one have any idea i was told it could be the computer of the body computer thanks you
|
- #175 of 209
-
Re: 1999 jeep grand cherokee Electrical Problems 4.0 [dayneseditz]
by dayneseditz
-
Aug 25, 2009 (1:55 pm)
-
|
|
Replying to: dayneseditz (Aug 25, 2009 2:39 am)
can someone please help me
|
- #176 of 209
-
Re: 1999 jeep grand cherokee Electrical Problems 4.0 [dayneseditz]
by tuggajb
-
Aug 26, 2009 (6:01 pm)
-
|
|
Replying to: dayneseditz (Aug 25, 2009 1:55 pm)
i would change the ignition switch as that is a lot cheaper to changr than the pcm could be bad contacts
|
- #177 of 209
-
98 Jeep Cherokee Amp gauge intermittent problem
by eric_g
-
Aug 27, 2009 (6:35 am)
-
|
My 98 Cherokee starts normally, but sometimes, after driving for a few minutes, the 'Check Gauges' light comes on and the amp gauge drops to 9 volts. This continues until the engine is shut off. On restart it will be OK. It does not happen very time but it's happening often enough now to cause me to worry.
Any suggestions as to what the cause/fix might be?
Thanks
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs 
