Ask the Car People.SM


Ford Expedition Advance Trac Problem

17 messages,  Last post on Aug 11, 2010 at 1:51 PM

You are in the Ford Expedition Forum.

What is this discussion about? Ford Expedition, Auto Repair, SUV

Messages Page 3 of 3

#13 of 17 by bwanapete

Mar 02, 2009 (11:43 am)

Your tailpipe in the water? Not likely, so maybe this is time to start throwing parts at it. Maybe the dealer will find that is easier than thinking, and the warranty should cover them.

#14 of 17 07 Expedition hesitates on ramp by chris_817

Jun 17, 2010 (12:02 pm)

Replying to: bwanapete (Mar 02, 2009 11:43 am)
Same thing happened to me today. First time pulling my boat up a ramp in this vehicle. Left foot on brake, right foot to ease up ramp and each time it just sat there and would not accelerate. I ended up taking my foot off the brake and it took right off. I did not have to restart engine.
 
I know the manual suggests using the parking brake until vehicle begins to move. it says this will help to stop will spin.
 
I wonder if this has anything to do with traction control, ABS or Advance-trac as opposed to an actual failure of the vehicle? Seems like it wants to cut power if it thinks you are braking and accelerating at the same time like during an emergency?
 
I'll use parking brake next time and see if I still have an issue.
 
Chris

#15 of 17 "check advance trac" light on by cobalt25

Jun 28, 2010 (4:34 pm)

I thought I felt a slight pulsation in the brakes on my '06 Expedition. It's got 65k on the clock and I can't remember if I've replaced the pads yet. Is it possible I haven't?
  
The "check advance trac" light issue could be related to this. Anyway, the pads looked good with maybe three-eighths of an inch of meat showing. However, it looked like there were SLIGHT vertical lines showing on the pads. Would they be wear indicators? No squealing whatsoever.
  
Then , for the bigger issue, the "check advance trac" light came on right after the brake inspection. How can I determine if I really should check the light? Do I have to pay a dealer to run a code or is there a way to do it myself? Any ideas?
  
thanks, Peter

#16 of 17 validity of "check advance trac" light by cobalt25

Jul 22, 2010 (3:53 am)

I removed all 4 wheels on my 2006 Expedition recently to check brake pad wear. When driving operation resumed the "check advancetrac" light came on. I had read somewhere that wheel removal sometimes triggers false reading for the warning lights. Is that true? How do I reset the message? It is getting to be annoying because I can't read the dashboard messages properly with that displayed.
 
thanks, Peter

#17 of 17 Expedition EL 2008 by gcullinane

Aug 11, 2010 (1:51 pm)

My traction control light starts to flash for no reason at all on occasion and when I apply the brakes the truck will pulsate and brake pedal goes to the floor. They switched out the module but the truck continues to do the same thing. Anyone else have this issue?

Messages Page 3 of 3

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement