Ask the Car People.SM


Hyundai Veracruz Options and Accessories

150 messages,  Last post on Jul 24, 2011 at 5:57 PM

You are in the Hyundai Veracruz Forum.

What is this discussion about? Car Buying

    

Messages Page 15 of 15

#141 of 150 Re: Wiper blade replacement [PAVC] by stush

Dec 16, 2008 (8:11 pm)

Replying to: PAVC (Dec 16, 2008 3:15 pm)
No, you can go to any parts store and get them. Auto Zone will even put them on. I have a 07 Entourage, just put them on 3 days ago. It's easier to replace the whole assembly. I bought 2 Rainex Lattatudes from Pep Boys, buy 1 get 1 free with mail in rebate. But I do believe I have to have the dealer replace the rear wiper blade. Never asked ,but, it just looks like a dealer only part. I can't seam to figure out how to remove it.

#142 of 150 Wiper Replacement by jmaulsby

Dec 18, 2008 (2:31 pm)

I just had my wiper blades, front and back, replaced by the dealer for $45, but there was no charge for labor! I got lazy this time, but will not purchase the next set from Hyundai. Each blade was $15.

#143 of 150 Wipers not standard by acdii

Jan 09, 2009 (7:44 am)

I dont know about the 07 model, but my 08 I found out that the wiper mounts are not a standard type, they clip on the arm with a different style mount. The standard hook wiper arm blade that you normally see on a car wont work on the 08. In fact there was NO listing for any wipers in any of the books or catalog lookup on the computer. Same goes for the rear wiper.
 
Oh and jmaulsby, $15 for those blades is not bad at all. A set of Bosch blades of the type used on the VC are $20 each. The blades I purchased, thinking they would work cost me $44 with tax for just the two front blades. Luckily they refunded them right away after I showed them the factory blade.

#144 of 150 Re: Wipers not standard [acdii] by jonnyguru

Mar 06, 2011 (4:13 pm)

Replying to: acdii (Jan 09, 2009 7:44 am)
I agree with acdii. I have an '07 Vera Cruz and the rear wiper is NOT a standard attachment. The fronts are standard, though the 20" passenger side can be hard to find with the right connector.
 
$15 per blade at the dealer with free installation is a STEAL! Cheap blades are about $10 each. Decent ones like RainX, Michelin and Bosch are almost $15, and quite honestly the Hyundai OEM ones are better than Bosch. If I could get blades installed for $15 each, I'd go that option myself!

#146 of 150 Veracruz limited homelink problem by jchiang

Nov 05, 2008 (11:39 pm)

I have a veracruz limited 08'.
I followed the programming instructions for homelink setup, but failed.
 
Is there anyone who can give me the very detail instruction on setup the gate opener?
 
I checked the homelink website, but not cleared...

#147 of 150 Re: Veracruz limited homelink problem [jchiang] by mobiz

Nov 06, 2008 (8:35 pm)

Replying to: jchiang (Nov 05, 2008 11:39 pm)
I just had to do this last week on our 08 VC Limited. Do you have a rolling code opener? I do, and the instructions weren't very clear for rolling code, but figured it out.
 
Follow the "Standard programming" section first even if you have rolling code.
 
THEN if you have rolling code, follow the "Rolling code programming" section in your manual. I emphasize the "THEN" because that is missing from the Hyundai manual. You may need to look at your garage opener's manual on how to program. My garage opener did have basically the same instructions that Hyundai has in the manual.
 
The piece that wan't clear for me was that I had to do the standard programming portion even if I have rolling code.
 
These aren't detailed, but I'm hoping you had the same confusion I had.
 
Post back on how it goes!

#148 of 150 Re: Veracruz limited homelink problem [mobiz] by jchiang

Nov 12, 2008 (12:14 pm)

Replying to: mobiz (Nov 06, 2008 8:35 pm)
Thanks for the advice.
I tried by following the instruction on the Homelink website.
Do we have the programming instruction on the service manual?
I have to find the manaul ....
 
If you have the instruction, would you please share with me?

#149 of 150 Re: Veracruz limited homelink problem [jchiang] by mobiz

Nov 12, 2008 (6:46 pm)

Replying to: jchiang (Nov 12, 2008 12:14 pm)
Check under the "owner's manual in pdf format" post. There's links to where you can download a pdf of the Veracruz manual.

#150 of 150 Re: Veracruz limited homelink problem [mobiz] by walshtech

Jul 24, 2011 (5:57 pm)

Replying to: mobiz (Nov 12, 2008 6:46 pm)
I just wanted to reply and say "Thank you!!!!" this post is highly accurate even for a new '2011 VC Limited. It is a shame that the directions are so unclear!
 
Thanks Again. You ROCK!

Messages Page 15 of 15

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement