ignition coil on my 2002 rodeo

4 messages, Last post on Apr 16, 2008 at 7:25 AM

You are in the Isuzu Rodeo Forum. Your Hosts are steve_ & tidester

What is this discussion about? Isuzu Rodeo, Isuzu, Auto Repair, SUV

#2 of 4 Re: ignition coil on my 2002 rodeo [ebcrumpler] by okmech1 Mar 13, 2008 (4:01 pm)
Replying to: ebcrumpler (Mar 10, 2008 12:56 pm) If your talking about the one on the drivers side at the firewall, oh yeah, I actually broke that boot because of the same problem. You could try removing the coil pack from the boot (they separate with no problem) and spray some wd-40 down or something. If you twist it a bit, it might break it free. If you damage it, or completely break it like I did, it's a NAPA part # 727-74445 Replies to this message: wlbrown9 (Apr 16, 2008 7:25 am)
#3 of 4 My 1997 isuzu rodeo by gully707 Apr 01, 2008 (1:25 pm)
2.6 4 cyl rodeo isuzu . changed ignition coil and crank sensor, and still it shuts off while driving. Any suggestions please.
#4 of 4 Re: ignition coil on my 2002 rodeo [okmech1] by wlbrown9 Apr 16, 2008 (7:25 am)
Replying to: okmech1 (Mar 13, 2008 4:01 pm) I did not see this post earlier, but to remove the stuck boot use a little compressed air down the center hole...it will break the seal and pop it right off.