03' Yukon Denali - Stabilizing Sys Disabled

4 messages, Last post on Mar 13, 2009 at 6:44 AM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon, GMC Yukon Denali, GMC Yukon XL, SUV

#3 of 4 Re: 03' Yukon Denali - Stabilizing Sys Disabled [made_up_4fun] by rsht Feb 21, 2008 (1:57 pm)
Replying to: made_up_4fun (Feb 19, 2008 12:17 pm) Would you happen to have, or be able to get the Trouble Code (e.g. P0123, or B0123...) for the "STABLIZING SYS DISABLED" message? Generally, you local AutoZone or Advanced Auto Parts store will scan the code for you for free, if you do not have a code scanner. This message sounded like either ASC or TMC related message, but not sure without the code.
#4 of 4 Re: 03' Yukon Denali - Stabilizing Sys Disabled [made_up_4fun] by djtwisted Mar 13, 2009 (6:44 am)
Replying to: made_up_4fun (Feb 19, 2008 12:17 pm) I have the same problem with the stabalizing message, but with the running out of gas issue, if the mileage is about 90,000 or above you will need to replace the fuel pump. i have the same issues with the car not starting after running out of gas and once i replaced the fuel pump my vechicle started right up. i have not seen this message come back up yet but i will have to address it when it comes. The fuel pump install took about 2hrs from start to finish. This was not a hard install and just a little time consuming.