Last post on Apr 02, 2009 at 1:19 AM
You are in the Chevrolet Silverado & GMC Sierra
What is this discussion about?
Chevrolet Silverado 2500HD, Chevrolet C/K 2500 Series, Engine, Truck
Jan 21, 2009 (8:31 pm)
i have a 93 chevy with a 5.7 in it and i just replaced the intake and valve cover gaskets. now its missing when i pull up to a stop light and almost wants to die,i can watch the rpm gauge purge up and down. when i pull away from the light it runs like crap then goes away and runs desent.i checked the timing and it was good.it also bogs down when backing up almost dies again. anyone have any ideas?it also idles fine in park
#6 of 8 Engine stalling problem
Mar 06, 2009 (11:12 am)
I have a 94 Chevy 2500 with a 350 engine throttle body injection. The truck starts fine in AM, drive 4 to 6 miles engine dies, spray starting fluid in air cleaner, engine runs another 4 to 6 miles or if you turn off ignition after driving, engine will crank freely but will not start, spray starting fluid and it starts right away and will run smoothly for awhile, then die again. Changed fuel filter, changed pressure regulator at throttle body, fuel pump was changed about a year ago. Has anyone experienced this or have any ideas what to check next?
#7 of 8 new to old front clip
Mar 15, 2009 (10:30 pm)
i have a 82 chev threequarter ton front clip and i would like to put it on a 69 frame will it fit? eny info wood be great
Apr 02, 2009 (1:19 am)
i have a '97 silveado 2500, my fuel pump was acting up so i replaced it,i can get it started but then out of no where the pump goes out on me agin. then the next day it starts right up like nothing is wrong. any help would be great,thanks