Ask the Car People.SM


Chrysler Sebring Ignition Problem

21 messages,  Last post on Sep 01, 2012 at 12:40 PM

You are in the Chrysler Sebring Forum.

What is this discussion about? Chrysler Sebring, Sedan

Messages Page 3 of 3

#14 of 21 Re: 01 Sebring key turns but nothing happens. [93buicklesabre] by krazyhicchic

May 08, 2012 (9:10 am)

Replying to: 93buicklesabre (Sep 28, 2011 3:26 am)
I have the same problem with my 2006 Sebring, Touring. I see there are no replys to your post. Could you tell if you got it fixed yet. I am thinking may e the relay or 40 amp fuse.

#15 of 21 2006 sebring wont start by krazyhicchic

May 12, 2012 (11:26 am)

My 2006 Chrysler Sebring will not start. The warning lights, radio and wipers will NOT work,...the lights work, remote entry does, the windows work. When I turn the key the P R N D 2 1 and the oil indicator lights up and the ding ding door is open works, Ok, the car will not jump off, I replaced the radio fuse, the 10 amp ignition fuse, had the battery tested. I cant seem to find the starter to tap on it even with a diagram, the one Autozone gave me looks nothing like my car. When I turn the key you can hear a faint tick from the fuse compartment under the hood. I don't really think its the relay. I hate newer cars. So if anyone has a suggestion or can pinpoint the starter for me, I have even crawled under the car, I think I found it, but not to sure, So OMG IM gonna blow a fuse and need to be replaced! I knew to never buy a Chrysler, but it sooo nice.

#16 of 21 Re: 2006 sebring wont start [krazyhicchic] by claires HOST

May 12, 2012 (1:12 pm)

Replying to: krazyhicchic (May 12, 2012 11:26 am)
krazyhicchic, try asking in our answers section too -- some of our members hang out there to answer quick questions, and might be able to point you in the direction of your starter:
 
http://answers.edmunds.com
  
After you post your question, you can check for responses by clicking the "my answers profile" link near the top of the page.
 
ClaireS, Host
Automotive News & Views | Coupes & Convertibles

#17 of 21 Re: 2006 sebring wont start [krazyhicchic] by 93buicklesabre

May 13, 2012 (11:53 pm)

Replying to: krazyhicchic (May 12, 2012 11:26 am)
Well I had the same problem with my 2001 Chrysler. Just letting you know the starters in these cars are covered with a skid plate on the bottom of the engine and you have to take a motor mount off. lol... But it sounds like the same problem I had with mine and it needed a new starter. I do alot of work with cars but honestly you may have to take it to the dealer to get it replaced because I wasnt able to do it.
 
Just FYI I lost all dash lights and the mileage counter didnt come up.

#18 of 21 Re: 2006 sebring wont start [93buicklesabre] by krazyhicchic

May 14, 2012 (12:28 pm)

Replying to: 93buicklesabre (May 13, 2012 11:53 pm)
Thanks so much, I had read that the starter was under there I just really was hoping it was somewhere else and didn't want to start tearing into it, I hate new cars! I bout blew a fuse just taking the battery out. What a stupid concept, in the wheel well! I have to get me some jack stands now, need em anyway, just don't trust the floor jack that much. I thank you again. I hope this is my problem, if not, gasoline and a rag is in order.

#19 of 21 Re: 2006 sebring wont start [krazyhicchic] by 93buicklesabre

May 14, 2012 (2:22 pm)

Replying to: krazyhicchic (May 14, 2012 12:28 pm)
Your welcome.

#20 of 21 Re: 2006 sebring wont start [93buicklesabre] by krazyhicchic

Jun 01, 2012 (11:04 am)

Replying to: 93buicklesabre (May 13, 2012 11:53 pm)
Well now, I didn't have a skid plate to remove but it was a bitch getting the starter off. took it to the auto parts place had it tested, nothing wrong with it. So then put it back on, and guess what? Apparently, I missed the FUSE that was blown, I checked them all but I couldn't tell where this one was blown, how I found out, a tester. A fuse and flipping fuse! Oh well over it now.

#21 of 21 Like a lot of you, Car starts one sec, next it don't by irish_lass1

Sep 01, 2012 (12:40 pm)

I have a 1997 Chrysler Sebring convertible, replaced the battery yesterday, went through all the wires, found one melted and a loose one on the starter. Car worked with only a little hesitation after new battery was installed, this morning brought the car up for gas, brought it home, back to not starting. Waited about 15 minutes and tried again, it started with a slightly longer hesitation, but it started without a jump. I was told before replacing the battery, that the started was drawing more power than it requires, Please any help would be wonderful. Thank you in advance.

Messages Page 3 of 3

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement