• Reply

#1 of 6 '02 V8 4x4 Quad Cab Dakota Pulling to the Right by thndrcat

Jan 28, 2008 (5:11 pm)

Replies to this message:

• clintonb (Jul 28, 2008 8:07 am)

• Reply

#2 of 6 Re: '02 V8 4x4 Quad Cab Dakota Pulling to the Right [thndrcat] by clintonb

Jul 28, 2008 (8:07 am)

Replying to: thndrcat (Jan 28, 2008 5:11 pm)

• Reply

#4 of 6 Clear instructions by 63pro

Jun 10, 2010 (9:15 am)

I have '91 Dakota, 3.6, rwd, standard cab. I want to basically replace or repair my front suspension. I bought a Hanes manual, an appropriate year/dealer service manual and am anxious to go at it. However, I am finding these manuals just don't cover enough detail to get me throught this. As an example, in looking at replacing the upper ball joint, I just assumed it was some kind of press fit, but when I went to auto parts store to get the replacement, it kind of looked like the joint "screwed" into some kind of "spacer" on the top portion of the control arm. This was not touched on by either of the manuals. I do have some mechanical sense, but still need help. I went on You Tube video, gained a little insight, but not much. Auto store personnel could help if I had a Camero, but seemed as baffled as me when they saw the replacement joint. Do any of you folks have any first hand experience you could share? I want to change both ball joints, spring, shock, and tie rod. Some I don't need help with, but upper ball joint and perhaps changing out all control arm bushings are in this no help catagory. Any help you could send me would be greatly appreciated.

• Reply

#5 of 6 drive shaft pitch by meesy26346

Sep 01, 2010 (9:39 am)

• Reply

#6 of 6 94 Dakota Control Arms by tjames1984

Oct 23, 2012 (8:29 pm)