Rear Fog Light: A tricky subject

22 messages, Last post on Oct 01, 2009 at 11:53 AM

You are in the Mitsubishi Outlander Forum. Your Hosts are steve_ & tidester

What is this discussion about? Mitsubishi Outlander, Exterior, SUV

#21 of 22 rear fog by rcpax Oct 01, 2009 (7:38 am)
So, you're doing this mod? Replies to this message: batman47 (Oct 01, 2009 11:53 am)
#22 of 22 Re: rear fog [rcpax] by batman47 Oct 01, 2009 (11:53 am)
Replying to: rcpax (Oct 01, 2009 7:38 am) Hi rcpax, Please visit: Rear fog light progress (no soldering, no cutting, and no drilling) at: http://www.mitsubishiforum.com/forum/showthread.php?t=25038&highlight=batman&pag- e=4 I spent some time reading the electrical circuit of the ETACS-ECU of the European Outlander and the ETACS-ECU of the US Outlander as well as the Tailgate Control Circuit. I found out that that there are better ways to add rear fog light and side marker functionality to the US Outlander. The solution that I will explain fully with diagram rests in plugging and unplugging connectors into the “rear bumper harness” and “rear end wiring harness”. This approach is clever. This solution came about after studying carefully the electrical circuits that control the functionally of these lights in both models (European and US). Waiting at the moment for some part# to arrive. I would like to have your appreciation about this contribution.