Need help- Crank Position Sensor

15 messages, Last post on Sep 25, 2009 at 12:31 PM

You are in the Oldsmobile Intrigue Forum. Your Hosts are pat & karens

What is this discussion about? Oldsmobile Intrigue, Sedan

#14 of 15 Re: stalling intrigue [bucknljake] by dukecebrelli Sep 16, 2009 (1:35 pm)
Replying to: bucknljake (Sep 16, 2009 6:30 am) Well, even if you had a bad sensor, the motor would still try and crank. I just found out recently that the ignition switch they used in these cars (and its sister cars) were known to have connection issues. Not sure, but next time it doesn't send power to the starter, try wiggling the key around while in the start position. (The proper test would be to use a volt meter to see if power is making it to the starter solenoid from the ignition switch) -Duke Cebrelli owner infocarcaredelivered.com
#15 of 15 Re: stalling intrigue [bucknljake] by floyd1022 Sep 25, 2009 (12:31 pm)
Replying to: bucknljake (Sep 16, 2009 6:30 am) IF it makes no notion to start I would say Ignition switch. If it was the crank sensor it would at least try to turn over. Owned my intrigue for many years now. Replaced it ignition switch twice. Contactors get scorched and burnt inside. I have actually repaired them but don’t even mess with it. They are about 80 dollars at AutoZone.