Last post on Jan 05, 2011 at 4:44 AM
You are in the Acura Integra
What is this discussion about?
Acura Integra, Steering, Suspension
Jun 08, 2009 (3:09 am)
I'd seriously look at motor/trans mounts which fall apart on this era of Honda/Acura. I recently had to replace 3 out of 4 on one of my cars and since I'm cheap I had a hard time finding any good ones in the junkyard. I had to modify bolt hole locations on 2 of them that were slightly off because they were from a manual and I couldn't find any good ones for my automatic. Bad rubber formulation, gets dried out and splits or detaches from the metal. Vibrations do change depending on engine rpm and if it's mounts then it makes sense to me it would probably be worst at lowest speed when you're trying to get started and at high revs. Mine were bad enough they actually "clunked" when the trans shifted.
#3 of 8 96 Acura Integra. Wheels wont turn
Oct 23, 2009 (7:52 am)
96 Acura Integra- I am able to reverse & drive foward. However the steering wheel wont turn left/right, the wheels are locked! when I try to turn the steering wheel, it is stuck. Can anyone tell me what the problem might be????
#4 of 8 Re: 96 Acura Integra. Wheels wont turn [integra_96]
Apr 07, 2010 (11:58 am)
make sure your power steering pulley and belt are functioning.
#5 of 8 power steering problem.
Oct 01, 2010 (1:40 pm)
#6 of 8 power steering confrontation
Oct 01, 2010 (1:45 pm)
My neighbor has a 97 acura GL with 150k + miles and last week asked me to service her power steering fluid. AS I recall It didn't require any fluid, but di d need brake fluid. A few days later the belt broke. She had another freind replace the brake and he told her that I had filled her system with motor oil and caused it to blow all the seals and freeze up the pump. Now she wants me to replace the whole system. I'll leave it there before I get more upset. No good deed? INput please.
#7 of 8 ammend
Oct 01, 2010 (1:46 pm)
Sorry he replaced the belt and apparently the reservoir.
#8 of 8 Re: Question: Cause for car to shake? [synkrowe]
Jan 05, 2011 (4:44 am)
Hello, good looking site ,want more information on this topic ...