You are here:
Forums
SUVs
Jeep Cherokee and Jeep Grand Cherokee
Jeep Grand Cherokee died suddenly at 50 mph

40 messages, Last post on Nov 02, 2009 at 8:42 PM
You are in the Jeep Cherokee and Jeep Grand Cherokee Forum. Your Hosts are steve_ & tidester
|
Replying to: blanblan (Jan 26, 2008 4:41 pm) And that is probably why more help was not forthcoming so that makes you a pioneer! (I didn't say trailblazer or pathfinder!) Seriously, though, consider writing up a guide (see link at top of this page). Eventually, someone else is going to come looking for that same information. Thanks! tidester, host SUVs and Smart Shopper |
|
|
Replying to: blanblan (Jan 24, 2008 7:48 pm) |
|
|
Replying to: blanblan (Jan 18, 2008 3:36 pm) My first question is this: Is the Camshaft position sensor the same as the camshaft synchronizer? If my local parts store doesn't have a listing for the CMP sensor but does have the pick-up plate, will the pick-up plate work for me? I love my Jeep but it is getting old and it's got a lot of miles on it. I want to keep it but I don't want to go broke fixing it. Is it likely that changing this part will fix the problem or only lead to more problems? Any info would be greatly appreciated. Thanks, Heeply Jeeply
|
|
|
Replying to: blanblan (Jan 18, 2008 3:36 pm) |
|
|
hello; i have a 2001 jeep grand cher 4.0L and was having trouble starting. i did the key trick and got code for crankshaft position sensor,i replaced and truck started right-up. now while truck is idling it stalled so i did key and got code p0351,p0352,p0353 ignition coil primary dwell time. I replaced ignition coil pack and truck is still running ruff,after replacing coil pack code p0351 went away but p0352,p0353 are still showing and truck keeps stalling. i went online to try to find some help could find anything. the code reads dwell time if theres anyone who has had this problem could you help please anything will help
|
|
|
Replying to: blanblan (Jan 26, 2008 4:41 pm) i read your post and agree with you that this forum has been much help, however you seem to have a good idea on what going on with the jeep. i have 2001 jeep gran cher and was having trouble starting it got code from key code was for crankshaft position sensor,changed c.p.s. and truck started right up. now truck is running ruff and will not idle keeps stalling did key and now getting codes for p0351,p0352,p0353 ignition coil changed coil pack and p0351 went away and truck still running ruff will not idle without stalling. code p0352,p0353 still showing i've taken all kinds of wrong advice from so called mechanics.i'm slowly learning that they've been wrong, changed spark plugs,fuel filter all kind of stuff and not one of them worked. i'm hoping that you may have some insight on what i could do or is this a job for the dealer.trying to avoid the costly repair tag that the dealer going to tack on please help anything would be helpful thank you; carl |
|
|
Replying to: heeply (Feb 09, 2008 10:42 pm) |
|
I own a '98 Jeep Grand Cherokee 6 cyl. IL, 2wd. (115,000 miles) and it keeps stalling (especially when it's cold). I'll start it up in the morning, back it out of the driveway, and it stalls (sometimes). Sometimes it'll start right back up...sometimes not?! I've spent a lot of money; taken it to two very respected auto shops here in town and still...nothing?! Not only can they find nothing wrong...it won't even stall for them?! Can someone please help me figure out what the heck is making my Jeep do this?! HELP!!
|
|
|
Replying to: jeepme (May 06, 2008 10:11 pm) |
|
I had a simular isues. I have a 04 jeep, and i thought it was just at a certian speed that it died off, but it latter would shut off on bumps, or at random times. I had to replace the computer on the car
|
|
You are here:
Forums
SUVs
Jeep Cherokee and Jeep Grand Cherokee
Jeep Grand Cherokee died suddenly at 50 mph
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2011 Jeep Grand Cherokee



Browse by Board
Browse by Topic
Today's Chats