Sign In Join 



GMC Envoy instrument panel problems

47 messages,  Last post on Oct 29, 2009 at 12:50 AM

You are in the GMC Envoy Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Envoy, GMC Envoy XUV, GMC Envoy XL, Electrical, SUV


Messages Page 4 of 5
1
2
3
4
5
Prev
Next
Last
Go To Msg #
Search This Discussion

#28 of 47
Re: instrument panel problems [frankie03] by TiredofGM
Jan 31, 2009 (9:52 am)
Reply

Replying to: frankie03 (Jan 21, 2009 3:19 pm)

I gave up on GM doing the right thing. I purchased all the stepper motors needed on ebay and now my 2004 Envoy instrument cluster works perfectly. It was very easy to do if you know how to de-solder and solder. I should have done this a long time ago.
 
Note to GM- You Suck!
#29 of 47
Re: instrument panel problems [TiredofGM] by uhlix
Feb 05, 2009 (9:49 am)
Reply

Replying to: TiredofGM (Jan 31, 2009 9:52 am)

I have a 2004 GMC Envoy with pretty much the same problem that everyone else on this thread has. The gauge in question for me is my oil pressure gauge. I have a friend that is an accomplished mechanic and has his own garage business so I'm thinking of purchasing the instrument cluster from ebay and working with him to replace it.
 
My question is this. Does anyone know where there is good documentation for replacing the instrument cluster? I'm sure we could figure it out ourselves with some investigative work, but any information that any of you can provide for doing the job would make it that much easier and quicker for us.
 
Thanks much!
Hank
#30 of 47
Re: instrument panel problems [ksatc1] by JJPINTO788
Feb 08, 2009 (3:35 pm)
Reply

Replying to: ksatc1 (Jan 06, 2009 7:56 am)

My 2004 XUV has a pegged oil pressure gage since last year and then last week the speedo was saying 60 when i was parked. It took 2 days for the speedo to return to normal, but don't know if it will haooen again. With 50k miles it out of warranty, but was is up with GM fixing the problem for free.
#31 of 47
Re: instrument panel problems [TiredofGM] by mimi14
Feb 12, 2009 (5:55 am)
Reply

Replying to: TiredofGM (Jan 31, 2009 9:52 am)

I am unclear, is GMC willing to fix this problem or not? I have a 2004 Envoy XL and I have no idea what to do. Can I get some more information on the stepper motors you purchased. thanks
#32 of 47
Envoy instrument problems by JJPINTO788
Feb 12, 2009 (11:23 am)
Reply
I visited my local GMC dealer with a copy of letter by Knockster dated 10/2/08. I was given by the service advisor a copy of GM bulletin #07187B that does not have Envoys currently included in this repair program. He can only provide repairs to Sierra, Yukon & Yukon XL,as stated in 07187B. This current bulletin dated 9/9/08 replaces bulletin 07187A issued 11/07. I was also told that my oil pressure gage problem can be due a bad sending unit.This does not explain the irratic speedo problem that re-appeared after self- correcting.I am not the person who purchased and installed the stepper motors etc but have the ability to solder if necessary. I would also be interested in hearing more on this repair procedure.
#33 of 47
2006 GMC Envoy gremlins by pegaleg50
May 08, 2009 (2:48 am)
Reply
I filled my tank up, and all of a sudden, the gas gauge is reading empty, with the yellow light blaring at me. As I drive along, the light goes out, and the gauge slowly crawls towards full. Huh? Sometimes my yellow "stabilitrak" lights come on, even though I can stop the vehicle just fine and the traction control and ABS seem to be working OK. Huh?
#34 of 47
Customer Assistance by wsr58
May 19, 2009 (9:49 am)
Reply
GM is aware of this situation as noted in message #13 of this thread. GM Bulletin GMP07-174-Special Coverage Adjustment #07187. More information is available from the GM Customer Assistance Program at 1-866-790-5600. Good luck to all with this situation.
#35 of 47
Re: [mrgrass] by bfinch
Jun 02, 2009 (8:37 am)
Reply

Replying to: mrgrass (Nov 03, 2008 1:51 pm)

what gmc dealer did you contact about your envoy? I have an '04 envoy and i called the recall center and they said that teh envoy was not on the list for this recall but they would note this as a complaint. and if anything should become of it then they would be in contact with me. Thanks bobbie
#36 of 47
Re: Assistance Needed [cyokley] by loneal
Jun 14, 2009 (2:57 pm)
Reply

Replying to: cyokley (Oct 02, 2008 5:45 am)

could you tell me the name of the guy in wichita who fixes these. thanks would certainly appreciate it.
#37 of 47
Re: Assistance Needed [knockster] by loneal
Jun 14, 2009 (2:59 pm)
Reply

Replying to: knockster (Oct 02, 2008 4:37 pm)

Ive done quite a bit of soldering. what part do I need to do the ten dollar fix. thank you very much.

Messages Page 4 of 5
1
2
3
4
5
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement