You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif)
Forums
Sedans Hyundai Azera Hyundai Azera Warped Body Panels
Hyundai Azera Warped Body Panels
6 messages,
Last post on Jan 04, 2008 at 6:45 PM
You are in the Hyundai Azera Forum.
Your Hosts are pat & karens
What is this discussion about?
Hyundai Azera, Auto Body, Sedan
- #4 of 6
-
Re: Warped body panels [alaskawhaley]
by gamleged
-
Jan 03, 2008 (6:16 pm)
-
|
|
Replying to: alaskawhaley (Jan 03, 2008 12:21 am)
Evidently an unevenly-distributed temperature contraction between the body panels and the underlying mounting structure, with the panels contracting notably more than the understructure in really cold temps. This would be the first mention of such a problem in an automobile that I've ever heard of, possibly because the panels are especially lightweight...
|
- #5 of 6
-
Re: Warped body panels [gamleged]
by cobrazera
-
Jan 04, 2008 (2:42 am)
-
|
|
Replying to: gamleged (Jan 03, 2008 6:16 pm)
Looks like Hyundai should have picked a colder place for their winter weather testing.
I recall the opposite thing happened with the first Saturn cars. Their intro was delayed for a year or so because during testing in Arizona, the plastic doors swelled shut and could not be opened.
|
- #6 of 6
-
Re: Warped body panels [cobrazera]
by cdmuile
-
Jan 04, 2008 (6:45 pm)
-
|
|
Replying to: cobrazera (Jan 04, 2008 2:42 am)
Reminds me of my '85 Renault 5 " Le Car". The first time the temp hit 0 here in Iowa, the driver side push open rear seat window came off its hinges. Went to the dealer and they said they knew about the problem. They had been given a special glue by Renault to fix the problem, Two days later the passenger side window did the same thing. The glue worked. Wish they had thought about very cold weather problems before production started.
|
You are here:
Forums
Sedans Hyundai Azera Hyundai Azera Warped Body Panels
