You are here: Forums SUVs Jeep Cherokee and Jeep Grand Cherokee 1991 Jeep Cherokee neutral safety switch, how to bypass

1991 Jeep Cherokee neutral safety switch, how to bypass

13 messages,  Last post on Nov 26, 2009 at 3:37 PM

You are in the Jeep Cherokee and Jeep Grand Cherokee Forum. Your Hosts are steve_ & tidester

What is this discussion about? Jeep Cherokee, Electrical, SUV

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

#10 of 13 Re: How to bypass Cherokee Neutral Safety Switch [jimbob15] by jimbob15 Apr 24, 2009 (9:16 pm)
Replying to: jimbob15 (Mar 13, 2009 8:33 pm) Well, we did not end up doing the bypass though that was definitely the next step. We had the car at a shop who got the wiring schematics & tracked the problem down to some melted wires somewhere in the stering column. They rewired that portion & we have not had problems since, or so far...good luck.
#11 of 13 Re-Building the NSS is fairly easy by coloradolove Aug 04, 2009 (10:19 am)
Hi, I'm bypassing the neutral safety switch today but I'm posting in regards to the poster who didn't want to bypass but didn't want to pay to replace the NSS either.   I've re-built my neutral safety switch several times and it's really not hard. All you really need is a wrench and some degreaser. You can Google how to do it. I'm not all that mechanically savvy (no formal training) and my experience is limited to stuff I've done on my Jeep and wiring up sound systems. It took me maybe 2 hours tops to re build it.   However, the reason I'm bypassing is because I'm tired of having to rebuild it every year or so. They get gunked up and the metal contact points do get pretty worn down by the time the vehicles are this old (10+ years). So you can easily re-build it you just may have to do it again every so often. Another good option is to find a newer jeep in a junkyard and snag their NSS, rebuild it, and slap it on your older Jeep. Good luck!
#12 of 13 Re: Bypassing Jeep Neutral Safety Switch [409man] by frankiejames Nov 26, 2009 (12:25 pm)
Replying to: 409man (Apr 24, 2009 6:31 pm) Hey Brian or anyone else who could help me out on this...I have a 1995 Cherokee with 3 speed transmission...Same problem as all the others with the neutral safety switch...I followed the directions given and installed a remote"> starter button in the circuit with a fuse...tried hooking it to one of the terminals on what appears to be the starter relay on the back bottom of the starter...nothing happens...tried the other terminal and nothing either...My starter has the main large wire going to a terminal on the top left as viewed from the back of the starter...the selenoid appears to be located on the bottom of my starter and has two terminals...can anyone please help me get this going...Here is a link to a pic of my starter over on imageshack   http://img341.imageshack.us/i/img1298n.jpg/][IMG]http://img341.imageshack.u- s/img341/581/img1298n.th.jpg   thanks so much...Frankie...   Replies to this message: frankiejames (Nov 26, 2009 3:37 pm)
#13 of 13 Re: Bypassing Jeep Neutral Safety Switch [frankiejames] by frankiejames Nov 26, 2009 (3:37 pm)
Replying to: frankiejames (Nov 26, 2009 12:25 pm) Never mind... It helps to be on the starter rather than the generator... Anyone know however, what fuse should be required in this line? Thanks Frankie

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Jeep Cherokee and Jeep Grand Cherokee 1991 Jeep Cherokee neutral safety switch, how to bypass