Ask the Car People.SM


Sports and Sporty Cars of the '80s

130 messages,  Last post on Mar 18, 2009 at 1:22 PM

You are in the Classic Cars Forum.

What is this discussion about? Classic Cars, Coupe, Convertible, Truck, Sedan, Wagon

Messages Page 14 of 14

#126 of 130 Re: From today's AutoWeek... [Mr_Shiftright] by kyfdx HOST

Mar 18, 2009 (7:26 am)

Replying to: Mr_Shiftright (Mar 17, 2009 1:44 pm)
When I owned a 911, I used to get Porsche after-market catalogs in the mail...
 
My wife was pregnant.. and, one day I was browsing a catalog.. A set of pistons for an engine rebuild was $3600!! Just the pistons... Figured if I had major engine problems, I was probably out $10K.. Pretty big dollars for a poor working man...
 
Son was born on Friday... by the next Saturday, the 911 went bye-bye...

#127 of 130 Re: From today's AutoWeek... [kyfdx] by Mr_Shiftright HOST

Mar 18, 2009 (9:16 am)

Replying to: kyfdx (Mar 18, 2009 7:26 am)
A thorough rebuild on a 911 nowadays, by a well-qualified Porsche mechanic in California is about $12,500. But this engine should last 250K or more and will run like you won't believe.
 
You can use non-German parts but longevity will suffer.
 
Rebuilding a V-8 450SL or 560SL could top $16,000 but that's better than a Ferrari at $35,000 to $60,000 (for the newer ones)

#128 of 130 Re: From today's AutoWeek... [Mr_Shiftright] by kyfdx HOST

Mar 18, 2009 (9:20 am)

Replying to: Mr_Shiftright (Mar 18, 2009 9:16 am)
yeah.. those weren't factory pistons, either..
 
Heck, I only paid $20K for the whole car!
 
Ah... to be young and single, again..

#129 of 130 Re: From today's AutoWeek... [Mr_Shiftright] by lemmer

Mar 18, 2009 (11:10 am)

Replying to: Mr_Shiftright (Mar 18, 2009 9:16 am)
How much for a top end rebuild on a 911?

#130 of 130 Re: From today's AutoWeek... [lemmer] by Mr_Shiftright HOST

Mar 18, 2009 (1:22 pm)

Replying to: lemmer (Mar 18, 2009 11:10 am)
Depends how far you go...if you can clean up the valves rather than replace them, that's a big savings. Also depends on which engine. On some engines, just taking the heads off without renewing the case studs is kinda risky...more like a "patch job" really. And on an OLDER Porsche, those studs can break when you twist them off for the first time in 30 years.
 
So maybe $2500--$5000, depending on a lot of things. You have to pull the engine and then it's one of those "while you're in there" sort of deals. Clutch? heater boxes? alternator? fan bushings? CV joints?

Messages Page 14 of 14

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement