Last post on Mar 20, 2013 at 5:05 PM
You are in the Isuzu Rodeo
What is this discussion about?
Isuzu Rodeo, Electrical, SUV
#36 of 78 1992 Rodeo 3.1L V6 4WD Turn Signal Problem
Sep 24, 2008 (1:05 am)
My left (drivers side) turn signal flashes normal and works OK however when I turn on my right (passenger side) turn signal I can hear it flash about 3-4 times as fast but no lights front or rear flash at all and neither does the indicator light in my dashboard. I have replaced all of the bulbs both front and rear and also the flasher however the problem persists. Can anyone give me an idea on what to check next? I've replaced all fuses also just to be sure.
I cannot afford to get pulled over and I live in Florida so I need get this fixed ASAP.
Any help will be appreciated.
Thx in advance.
#37 of 78 Re: 1992 Rodeo 3.1L V6 4WD Turn Signal Problem [darth_venom]
Sep 24, 2008 (9:49 am)
I am having the EXACT same problem with my 94 that I just bought. Please help! Thanks
#38 of 78 Re: 1992 Rodeo 3.1L V6 4WD Turn Signal Problem [kbrooks879]
Sep 24, 2008 (4:36 pm)
Hopefully we will both get the help we need to steer us in the right direction to correct this problem.
Thanks for your reply!!
#40 of 78 Please Help?! I'm still having Turn Signal Problems!!
Sep 27, 2008 (8:53 pm)
I have a 1992 Rodeo LS V6 3.1 lt. engine and despite new bulbs & flasher I can't get my right (passenger side) turn signal to work. My left (driver side) turn signal works perfectly but with the right side the flasher seems to flash/click nearly 3-4 times faster than normal and fails to flash the bulbs both front and rear. Brake lights, parking, and headlights all work normally but still no right turn signal.
Please can anyone out there help me with this problem?
Thanks for your replies and help in advance.
#41 of 78 Re: Please Help?! I'm still having Turn Signal Problems!! [darth_venom]
Sep 28, 2008 (1:26 am)
That happens when either your bulb is burnt out or the flasher has a faulty component (capacitor). You can try replacing one or the other or both.
SUVs and Smart Shopper
#42 of 78 Re: Please Help?! I'm still having Turn Signal Problems!! [tidester]
Sep 28, 2008 (9:07 am)
Thanks for your reply.
I suppose I could have gotten a bad flasher from the parts store. Yesterday evening I swapped all of the bulbs from the not working passenger side with those from the working drivers side. All of the drivers side (front & rear) still worked so that eliminates the bulbs as the problem therefore it seems it would have to be the flasher or in the wiring itself.
I'll get another flasher from a different parts store and try that and keep this forum apprised.
Again thanks! Please if you or anyone else out there has anymore ideas concerning this problem your replies are most welcome.
#43 of 78 Re: Please Help?! I'm still having Turn Signal Problems!! [darth_venom]
Oct 01, 2008 (1:03 pm)
I got a new flasher today. I'll put it in this evening when it cools off. The online manual states it's located on the drivers side above the kick panel. Since I did not install the other new one I'm not sure if this is the correct location. If anyone knows where exactly it it this would be a big help and greatly appreciated.
#44 of 78 Flasher & Bulbs (outside) Are Not The Problem.
Oct 13, 2008 (11:58 am)
I've replaced the flasher and again replaced all of the bulbs on the passenger (right side) of my 1992 Isuzu Rodeo LS (3.1 ltr. V6) and still no change. My passenger side turn signal still seems to flash 3-4 x faster than normal and doesn't work at all while my drivers side flashes normal and works fine.
In addition, I have cleaned all sockets, plugs, & contact points thoroughly on the passenger side just to be sure and it still refuses to work. Are there any known trouble spots for shorts in the wiring for this model/year I should look for?
Also, I notice the indicator light (bulb) in the dashboard for the passenger side seems not to be working which is a bulb (checked manual). If this dashboard indicator bulb is burned out could it be causing my problem?
This thing really has me stumped guys & I need my truck to get back & forth to my Doctor, Pharmacist, etc. Please any insight on this will be graciously appreciated.
Thanks in advance.
#45 of 78 Re: Flasher & Bulbs (outside) Are Not The Problem. [darth_venom]
Oct 29, 2008 (11:13 pm)
I'm having a similar problem, Except all my signals have now quit. The hazards still work, but the turn signals are dead. I swapped the bulbs out and no change
So anyone willing to toss a confused guy a bone?