Last post on Sep 28, 2012 at 12:58 PM
You are in the Dodge Stratus
What is this discussion about?
Dodge Stratus, Acura, Engine, Sedan
#11 of 12 Re: 2004 Dodge Stratus Camshaft Position [geri24]
Aug 03, 2011 (11:39 pm)
After months with same problem finally I could pinpoint this problem!!!!, in some way cable harness become damaged with a very sharp corner of fuel rail on one of the cables of camshaft positions sensor, I'd remove all tape from harness on this corner (Just where the sensor cables go in to the harness) I check for damage and found one of the cables punctured, so when engine vibation was severe groundind occurs and computer goes into safe mode... solution... I protect this corner wit a plastic cover to prevent future damages and put some tape on damaged cable... computer and car working perfect rigth now and gas MPG goes from 17 to 21.. good luck, hope this help you on solve this issue
#12 of 12 Re: 06 dodge stratus [jaredyayo]
Sep 28, 2012 (12:58 pm)
When I went in to O'Reilly's auto parts and bought a new cam shaft position sensor for my 02 Dodge Stratus 2.7L The gentlemen informed me I needed to stop back in and have him reset my computer so that it'd register that the sensor was replaced. It seems like a lot of people posting here are having the same issue, I think you guys should find a auto store that does free engine diagnostic on check engine lights because that diagostic reader can reset your computer, too.