Last post on Apr 28, 2013 at 4:41 AM
You are in the Ford Ranger
What is this discussion about?
Ford Ranger, Engine, Truck
#8 of 11 2000 Ford Ranger XLT Super Cab 3.0 V-6
Feb 10, 2010 (10:17 am)
Could someone tell me if the 2000 Ford Ranger with a 3.0L V-6 has a timing belt or a timing chain?
#9 of 11 Re: 2000 Ford Ranger XLT Super Cab 3.0 V-6 [leensher]
Oct 14, 2010 (9:03 am)
i think all of the v6 have timming chains- not belts
#10 of 11 4.0 l V6 just quit going 55 mph
Oct 20, 2010 (8:30 pm)
My son was driving his ranger at about 50 MPH when it just quit and left him at the side of the road. I checked the fuse box relays under the hood and none were (fuel) blown. Now the truck won't start. The truck has the large V6 engine with about 140,000 miles (2 wheel drive). Could this be a timing chain or crankshaft sensor?
#11 of 11 Re: engine problems [garym702]
Apr 28, 2013 (4:41 am)
I had same issue with 1988 ranger; do a search on google to see how to replace your fuel pressure regulator;
my fuel pressure regulator was passing gas to engine through the vaccum hose;
1. to check run the truck for approx 5 minutes 2. turn truck off 3. unplug the vaccum line from the back of the fuel pressure regulator and wait about five minutes and you will see gasoline if the diaphram in the fuel regulator has failed; note: please put some paper around the regulator to catch the fuel
hope this helps,