Ford Escape Engine and Performance Problems

8 messages, Last post on Nov 09, 2009 at 11:04 AM

You are in the Ford Escape Forum. Your Hosts are steve_ & tidester

What is this discussion about? Ford Escape, SUV

#4 of 8 Re: both cats glowing [bernie17] by vg33e power May 18, 2009 (6:33 am)
Replying to: bernie17 (May 16, 2009 5:07 am) I am no mechanic, but I would definately replace the PCM with a new or factory reman unit. You may have re-programmed it but it does not mean it is working properly. If you say that it is running to rich and you have replaced all the possible culprits then the only thing left that controls fuel mixture and what not is the PCM. I bet you the PCM is doing all the fuss. JMO!
#5 of 8 02 pressure sensor valve burning up by inby5 Jun 03, 2009 (10:02 am)
I've replaced it once and I don't know what is causing it to burn up, but it burned up within five minutes after I ran it. Any suggestions as to what is causing it? Replies to this message: inby5 (Jun 11, 2009 6:03 am)
#6 of 8 Re: 02 pressure sensor valve burning up [inby5] by inby5 Jun 11, 2009 (6:03 am)
Replying to: inby5 (Jun 03, 2009 10:02 am) it was the catlic convertor stoped up
#7 of 8 My Escape engine misses when it rains! by lg313 Jun 13, 2009 (1:12 pm)
I have a 6 cyl. Every time the engine bay gets humid the engine starts missing like crazy. Any help is appreciated.
#8 of 8 ford escape by 5521 Nov 09, 2009 (11:04 am)
2.3 4 cyl knocks at 1800 rpm 1 machanic said need new engine another says it's in the head I need to know which any ideas