Article Comments - 2009 Chevrolet Corvette ZR1

43 messages, Last post on Nov 02, 2009 at 12:18 PM

You are in the Chevrolet Corvette Forum. Your Host is claires

What is this discussion about? Chevrolet Corvette, Coupe, Convertible

First Look: 2009 Chevrolet Corvette ZR1 - By now you probably have noticed that the ZR1 looks like, well, a C6 Corvette. The silhouette is, of course, the same and the overall dimensions are essentially identical to a Z06. (more)

2009 Chevrolet Corvette ZR1 V8: A Statement of Power - GM isn't just kidding around with the supercharged 620-horsepower V8 that's at the heart of the 2009 Chevrolet Corvette ZR1. (more)

First Drive: 2009 Chevrolet Corvette ZR1 - This ZR1 produces 638 hp — the equivalent of the power produced by the 405-hp 1995 Corvette ZR-1 (the "King of the Hill Corvette") plus a 1984 Corvette plus a 1968 Citroën 2CV. (more)

2009 Chevrolet Corvette Follow-Up Test and Video - Bottom Line: Beyond its amazing performance numbers, the Vette is a good value and offers surprising cargo space. It just takes some getting used to. (more)

Outline

Messages Page 5 of 5: 1; 2; 3; 4; 5; Prev; Next; Last

#41 of 43 Pulley not that hard to change by corvette_parts Sep 03, 2009 (4:25 am)
Article reads "And for those of you who dream of swapping out the stock supercharger pulley to make like a billion horsepower, be aware that Meegan says, "We don't want people to do that. We have not made that easy." " We just installed a ZR1 pulley upgrade on a customer's Corvette. While it is not the EASIEST thing to do, it really isn't that hard. I don't think the average weekend mechanic would not be able to do it, but we can do it for them. We sell a ZR1 Corvette Supercharger Pulley Upgrade Kit online as well. Replies to this message: vette_triplets (Oct 18, 2009 5:58 am) corvette_parts (Nov 02, 2009 12:18 pm)
#42 of 43 Re: Pulley not that hard to change [corvette_parts] by vette_triplets Oct 18, 2009 (5:58 am)
Replying to: corvette_parts (Sep 03, 2009 4:25 am) Where are you located? I would like to take you up on the pulley change. If you are too far away, do you provide instructions if I purchase the kit? Replies to this message: corvette_parts (Nov 02, 2009 12:18 pm)
#43 of 43 Re: Pulley not that hard to change [vette_triplets] by corvette_parts Nov 02, 2009 (12:18 pm)
Replying to: vette_triplets (Oct 18, 2009 5:58 am) In Central Virginia. It should come with instructions but you will have to remove the supercharger to do it.