Last post on Jun 02, 2012 at 12:08 PM
You are in the Subaru Legacy & Outback
What is this discussion about?
Subaru Outback, Auto Repair, Car Warranties, Sedan, Wagon
#144 of 149 Re: 2008 outback wheel bearing [garyg1054]
Nov 25, 2011 (12:11 pm)
160,000 on struts?! That's impressive. I replaced the struts on my '96 Outback at 155K and they were shot - I mean totally useless. 100,000 miles is about all you'd ever want to put on struts before performance will noticeably tank. As strut performance deteriorates, not only will the ride become harsher, but the amount of wear and tear on other suspension components (such as ball joints, bearings, tie rods) will increase proportionally.
#145 of 149 Re: 2007 subaru wheel bearing problem [garyg1054]
Nov 25, 2011 (12:19 pm)
Possibly, but as a rear wheel, I am surprised that you would only hear it when turning left. That wheel has the least amount of weight on it in that scenario. Were it the right wheel in a left turn, I can see it only manifesting at that time due to the combination of weight and force.
If you put the car up on a jack stand and cannot get any wiggle out of the wheel when you test for bearing wear, I doubt it is the source of your problem. It could also be a differential or rubbing problem. Usually when you get to the "growling" phase, the bearing is fairly far gone.
#146 of 149 Re: 2008 outback wheel bearing [newsubiowner]
Nov 25, 2011 (3:27 pm)
"These assemblies are otherwise extremely easy to mount, total time being 30-40 min per corner. Fair cost is then $60-120 for the bearing hub ass'y and $50-80 for labor. Thus at less than $200 per corner it's difficult to countenance complaints of expensive repair requirements".
So says the subaruguru on this forum....best guess, you ARE getting a rip off quote.
#147 of 149 Re: wheel bearing failures [paisan]
Apr 22, 2012 (5:22 pm)
Have road noise, suspect wheel bearing/s. Got 4 wheels off ground, no play, but one seems to have more drag. Bad bearing or is drag coming from elsewhere in the driveline>?
#148 of 149 Re: wheel bearing failures [afahlgren]
Apr 23, 2012 (8:37 am)
If one is different than the rest, that pretty much points to that particular bearing.
#149 of 149 98 subaru legacy outback whinning rubbing noise coming from front end
Jun 02, 2012 (12:08 pm)
i have 1998 subaru legacy outback.i love this car but after years of standard maintance.things have gone bad for her the last couple of years.3 exaust breaks.and now i beleive its losing the wheel bearings.called napa for bearings and seals 105 for front bearings and seals but have to take the front spindle off since there pressed in,broke three bolts off last year changieng brakes around it. has me a little leary of taking this on myself.but on the account not much money these days fraid im going to have to.any advice is helpfull need a puller to swperate the shaft and spindle any body know what size of jaw puller this is?