Sign In Join 



GMC Jimmy Engine and Performance Problems

12 messages,  Last post on Aug 09, 2009 at 2:48 PM

You are in the GMC Jimmy Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Jimmy, Auto Repair, SUV


Messages Page 2 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion

#8 of 12
LOSS OF POWER by denis83
Apr 14, 2008 (7:10 pm)
Reply
I HAVE A 83 S-15 JIMMY2.8L W/CALIF EMISSION.ANY KIND OF INLINE OR LOAD AND IT CUTS OUT PUKES AND PUTTERS. IT WILL ONLY GO ABOUT 10 MPH. I HAVE REPLACE THE TPS ANDO2 SENSOR AND HAS NO MORE CODES. IT IS TIMED GOOD NOW AT A LOSS.
#9 of 12
help by jensjimmy
Apr 15, 2008 (8:45 am)
Reply
hey,
 
so I have a 1996 gmc jimmy 4x4. my boyfriend just finished taking the engine out and replacing the rear seal. when he put it all together it was starting to have issues starting. I would have to start it 4 times for it to finnally go. so besides that it was working great. now I was driving home from work yesterday and it was stalling like every 2 blocks. and when my boyfriend started it after I got home it was making this crazy knocking sound. he thinks it might be the airflow sensor. I think the starting it was the vacume lines mixed up but I don't know why it's stalling now anybody have any advice for me?
#10 of 12
Re: Jimmy won't shift [mmeuli] by peterock81
Apr 07, 2009 (6:46 am)
Reply

Replying to: mmeuli (Dec 10, 2007 9:44 am)

I had this problem with my jimmy and found it was the throttle position sensor. i as well had multiple codes including codes saying low input and high input to my map sensor. The truck shifted extremely hard going from 1st to 2nd and 2nd to D. I went to the junk yard and pulled one off a wrecked blazer for my truck 6.50 vs 45 or 50 bucks as a trial and error with the sensors. I tried the TPS first because from what reseach i did online it seemed to be the most common solution for the series of codes being tripped
#11 of 12
1996 GMC Jimmy won't stay running HELP by cproulx
May 05, 2009 (3:48 am)
Reply
I just changed the fuel filter on my Jimmy - it ran fine for 2-3 days. Now it will start and run in park but when I put it into gear and give it gas it sputters hesitates and stalls out. Anyone have any ideas?
#12 of 12
99 JIMMY SLE WARM ENGINE HARD STARTING by puzzledjimmy
Aug 09, 2009 (2:48 pm)
Reply
I HAVE A 99 JIMMY SLE. IT STARTS UP NORMALLY FIRST THING BUT WHEN IT GETS WARM AND I STOP TO DO SOMETHING FOR ABOUT 15 - 20 MINUTE, IT TAKES A FEW SECONDS TO TURN OVER. I MAY HAVE TO GIVE IT A LITTLE GAS TO TURN IT OVER. IT RUNS GREAT OTHERWISE. I HAVE REPLACED THE GAS TANK,GAS PUMP AND SENDING UNIT. THE FUEL FILTER. THE MAP SENSOR AND AIR FILTER. I HAVE HAD THE SPIDER INJECTORS CHECKED AND THEY ARE FINE. I GET BETWEEN 16 AND 18 MILES TO A GALLON. TOP PERFORMANCE FOR THIS VEHICLE I WAS TOLD. CAN ANYONE TELL ME WHAT MAY BE WRONG?

Messages Page 2 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics
Advertisement