You are here: Forums Sedans Toyota Camry 2009 Toyota Camry

2009 Toyota Camry

910 messages,  Last post on Nov 29, 2009 at 11:57 AM

You are in the Toyota Camry Forum. Your Hosts are pat & karens

What is this discussion about? Toyota Camry, Sedan

Messages Page 58 of 92 1 ... 55 56 57 58 59 60 61 ... 92 Prev Next Last

Go To Msg # Search This Discussion

#563 of 910 Air conditioner...Does your's blow A/C near freezing temperture? by waltchan Nov 06, 2008 (11:30 pm)
Does your 2009 Camry you're driving in ever freeze your whole body while the A/C is on max? I have some trouble getting used to the air conditioner because many times, the temperature would read lower than 45 degrees F while holding my mini thermometer at the vent oulet, even if the weather is 100 degrees F outside. I always have to raise the temperature knob a little until 1/4. I know A/C is always cold, but I have never been into something that is colder than a freezer. I already got sick and fainted three times already. Perhaps the Japanese-made Camry blows 20% colder air than USA-made Camry, but I don't really know. Help me what you observed? Replies to this message: dmathews3 (Nov 07, 2008 6:08 am) wwest (Nov 07, 2008 9:52 am)
#564 of 910 Re: Air conditioner...Does your's blow A/C near freezing temperture? [waltchan] by dmathews3 Nov 07, 2008 (6:08 am)
Replying to: waltchan (Nov 06, 2008 11:30 pm) Geez, I sure hope you weren't driving when you fainted. Why would you have the air on so long that it makes you faint? Something wrong here. Either you're pulling our leg or maybe you need a little help, and I don't mean at your local Toyota dealer. No one in their right mind would leave the air that cold ( if it was even possible) till they pasted out.
#565 of 910 Re: Air conditioner...Does your's blow A/C near freezing temperture? [waltchan] by wwest Nov 07, 2008 (9:52 am)
Replying to: waltchan (Nov 06, 2008 11:30 pm) If you use the system on MAX cooling and also set a LOW blower speed the temperature of the outflow might approach 35F.   If you are using max cooling to improve the A/C efficiency then re-routing the outlet airflow to footwell mode will help.   On the other hand if you are using it to combat outside odors then you should use the recirculate mode of the system and the A/C otherwise normally.   It is only the OLDER HVAC system wherein max cooling would automatically mean recirculate mode. Nowadays they are separate functions.
#566 of 910 Re: [exler] and TSB 0069-08 for vibration [notmybmw] [exler] [notmybmw] [k [kiawah] by exler Nov 07, 2008 (4:05 pm)
Replying to: kiawah (Nov 05, 2008 1:36 pm) Excellent analogy and information--As you say--depends on driving style. I guess I got used to my 02 Camry that did not have this problem to that great of an extent. I think that had a 4-speed transmission. Maybe adding that 5th gear in this transmission highlighted the vibration problem to a greater degree--more parts =more possible issues??? Thanks again.
#567 of 910 How to find out the year of the model using VIN? by mzhang Nov 07, 2008 (5:12 pm)
I went to a Toyota dealer to buy a Camry. The tag on the car and dealer all said it was a 2009 model. However, when I gave the VIN number to the insurance company, their system showed it was a 2008 Camry. Which one is correct? Is it possible that the dealers lied about the year? Thanks. Replies to this message: mcdawgg (Nov 07, 2008 6:42 pm) adamw812 (Nov 07, 2008 9:37 pm)
#568 of 910 Re: How to find out the year of the model using VIN? [mzhang] by mcdawgg Nov 07, 2008 (6:42 pm)
Replying to: mzhang (Nov 07, 2008 5:12 pm) If the sticker from the factory says it is an '09, it is an '09. The insurance company is probably wrong. Another way to check is look at the manufacture date on the sticker inside the driver's door - tell us what it is, and we can tell you if it is an '09. But, really just look at the sticker that's on the window with the prices, etc. That tells you the model year.
#569 of 910 Re: How to find out the year of the model using VIN? [mzhang] by adamw812 Nov 07, 2008 (9:37 pm)
Replying to: mzhang (Nov 07, 2008 5:12 pm) If the 10th digit in the VIN is an 8 it is a 2008, if it is a 9, it is a 2009
#570 of 910 Re: My Enhancement to Shifting Performance & Smoothness procedure [notmybmw] by exler Nov 12, 2008 (5:42 pm)
Replying to: notmybmw (Oct 17, 2008 7:53 pm) How is the Camry performing now after the TSBs that were performed last month?--was looking forward to your comments after driving it awhile . Thanks.
#571 of 910 Toyota CAMRY SE 2009/2008 BACK, NECK. LEG, PAIN, POOR LUMBAR SUPPORT by cars2009 Nov 19, 2008 (5:26 am)
Hello Toyota Camry Owners- 2008-2009 CAMRY SE   Please reply to us via emial through this forum-   1. Drivers seat pain and discomfort will driving 2. Neck, back, leg, pain 3. Poor lumbar support and seating position 4. Lack of dealer support. 5. Back problems and neck problems after a drive 6. Feel as if the lunbar is pressing against your spine   Please contact us - with your experiences, questions or concerns.   You may reach out to us via email on the forum- we'll respond!   Thanks !!! Replies to this message: Joseph1111 (Nov 22, 2008 5:26 pm) dmathews3 (Nov 23, 2008 8:32 am) pat (Nov 23, 2008 5:59 pm) andie4 (Jan 05, 2009 10:11 am) amirk (Jan 27, 2009 8:54 am) msbr743 (Jan 27, 2009 9:05 am) and 3 more... amirk (Jan 27, 2009 8:51 am) zhengm (Jan 29, 2009 11:09 pm) amirk (Feb 05, 2009 8:37 am) and 17 more...
#572 of 910 Re: 2009 could be the final year for Japanese-made Camry... [waltchan] by waltchan Nov 19, 2008 (7:18 pm)
Replying to: waltchan (Oct 24, 2008 9:17 pm) So far, so good. Continue to look through multiple online dealers' inventories non-stop since last month, and there are no more Japanese-made imports coming in since the September 2008 manufactured date. Maybe I got lucky by owning the very-last Japanese-made Camry to roll off the assembly line.

Messages Page 58 of 92 1 ... 55 56 57 58 59 60 61 ... 92 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Toyota Camry 2009 Toyota Camry