* Server response code: 500
We've had a minor breakdown.
We've had a minor breakdown.
The page you were looking for didn't load. Try refreshing the page, or check out our
Chevrolet Blazer Emissions Control System Problems
Last post on Mar 14, 2009 at 6:58 PM
You are in the Chevrolet Blazer
What is this discussion about?
Chevrolet Blazer, GMC Jimmy, Exhaust, SUV
#1 of 6 Emmisions System, low pressure
Nov 28, 2007 (3:15 pm)
Im 16 and this is my first car, today driving the check engine soon light came on, it didnt come on to school, but it came on, on the way home. It gave me the code P0452, which it says is a emissions control system low pressure sensor. What could this be? Is it something i can buy and fix myself or do i have to take it to te dealer? How long can this go?
#2 of 6 Re: Emmisions System, low pressure [joshh33]
Nov 30, 2007 (11:39 am)
Okay, first make sure your gas cap is on and tight. I remember how it was many years ago when I was in school, and someone may have stolen your gas cap.
Next, disconnect your battery for about 10-15 minutes and reconnect. This will reset the trouble codes stored in the computer.
As a friendly suggestion, when you post list the year model and mileage on your car. Makes it easier for the nice folks on this board to help you.
#4 of 6 emissions for the s10 Blazor above 1989
Feb 09, 2008 (2:22 pm)
HAd to edit the prior post here
I have a 1989 S10blazer The 4.2 V6 fi 175,456 mileas. Went for emissions test and Air inj sys, egr,pcv,fuel inlet restrictor, Cat Coverter,Evap control sys, gas cap integrity all passed, tail pipe #'s
Idle limit 1.20 reading 7.22 fail
2500 rpm 1.20 reading 6.86 fail
Idle 220 ...382. fail
2500 rpm 220... 267 fail
Seems there is to much emisions coming out of tail pipe all other things are ok. I do smell fuel when it starts though, and iot runs rough sometimes. I always kept up on tunups. also seems to eat more gas.. Need to know what parts would effect emissions that would cause high CO%. need to know something before having it fixed. thanks
added OBD code
I did th OBD I code flashes 44 lean mixture. if that helps any
#5 of 6 Re: emissions for the s10 Blazor above 1989 [nmart]
Feb 09, 2008 (7:41 pm)
With all the measurements showing a rich condition, and getting a code 44 on the oxygen sensor, I would wonder if the O2 sensor is bad, or if the wire is off. With the miles you have on the car, the O2 could have just flat croaked.
Bosch O2 sensors are something like $20 from O' Reilly's (The local franchise parts house) or about $45 for a Delphi.
#6 of 6 Blazer Evaporator Control Problem
Mar 14, 2009 (6:58 pm)
Hi! I have a 1996 Blazer L-10 with the 4.3 Vortex engine. The Service Engine Soon light recently came on. I brought it to AUTOZONE and they nicely ran the error code for me. It came back "Evaporator Control Problem" The gas cap seems OK, No obvious loose vacuum hoses and the canister looks OK. I do have gasoline leaking out of the rubber hose that connects the fill pipe to the gas tank pipe whenever I fill up with gas. It only leaks when I get gas. I think it's the short lenght of rubber hase between the fill pipe and gas tank pipe. Could this do be the problem? If not which vacuum hose do I need to check. I need to get it inspected and they can't inspect it with the engine light on so I'm kind of "up a creek with half a paddle". Thanks. Ken