Cabin Air Filter

4 messages, Last post on Nov 25, 2007 at 9:07 PM

You are in the Buick Park Avenue Forum. Your Hosts are pat & karens

#2 of 4 Super Charger Pulley sized by ggeeoo Nov 24, 2007 (5:46 pm)
So I finished the Cabin Filter and installed the air filter in the engine. While I had the shop vac out I decided to vac the interior and the trunk and lifted the bonnet and another project the belt had come off the supercharger because the tesioner pully bearing sized and the plastic ABS pulley sheared off the bearing. It looks like a tork bolt holds it on any one ideas. Also a cut the belt off for fear of more problems leaving it on. Anyone have tips on the replacement of the supercharger serpentine belt? This is a 1999 Buick Park Ultra sedan
#3 of 4 Buick rest of story by ggeeoo Nov 25, 2007 (8:57 pm)
I took it to the "Boys" because it turned out to be three wobbly pulley wheels not one and while I was at it replaced the main serpentine belt and a wobbly pulley wheels. Oddly though I got better gas mileage when the supercharger was not attached by belt...Buy I have the power back. Buick Park Ultra 1999 the total cost labor and parts 475.00
#4 of 4 Picture of Cabin Filter Install by ggeeoo Nov 25, 2007 (9:07 pm)
E mail me at arthur.lev123bluegmail.com and I can E mail you the diagram for intall of the cabin filter for Buick Park Ultra 1999