You are here:
Forums
Sedans
Honda Accord
2008-2009 Honda Accord Accessories

153 messages, Last post on Nov 06, 2009 at 7:02 AM
You are in the Honda Accord Forum. Your Hosts are pat & karens
Has anyone placed the Honda Under Body Spoiler Kit on their Accord? I have seen this accessory body panels in person and it looks really good on the Coupe. I am sure the kit components sit a tad lower to the ground than the orginal body panels. I also might be interested in the Honda HFP Sport Suspension Kit that lowers the Accord about 1" and I am wondering if there would be any scraping issues with the under body spoiler kit and the suspension kit installed with the ground? Anyone know out there?
|
|
|
Anyone know why the rear view camera isn't available for the coupe? Seems like it would be another nice feature to integrate with the navi screen, but I'm not sure why it is only available for the sedan. I backed into a low wall (no damage), but it made me realize how nice it would be to have backup sensors or a camera. |
|
|
looking to put a intake on my accord anyone know when one is commen out???? need it before my lease is up!!!!!!!!...lol o yea bytheway its tha 190hp 4cyl...NEED SOME MORE BALLS |
|
|
|
|
Replying to: mvp2ny (Feb 15, 2008 8:47 pm) NHTSA Cracks Down on Aftermarket HID Conversion Kits The National Highway Traffic Safety Administration (NHTSA) is targeting high-intensity discharge (HID) conversion kits for enforcement actions. NHTSA has concluded that it is impossible to produce HID conversion kits (converting a halogen system to HID) that would be compliant with the federal lighting standard, Federal Motor Vehicle Safety Standard (FMVSS) No. 108. The noncompliant kits frequently include a HID bulb, a ballast, an igniter, a relay and wiring harness adapters. The NHTSA believes this equipment presents a safety risk to the public since the kits can be expected to produce excessive glare to oncoming motorists. In one investigation, the NHTSA found that an HID conversion headlamp exceeded the maximum allowable candlepower by over 800%. Under FMVSS No. 108 Section S7.7 (replaceable light sources), each replaceable light source for headlamps must be designed to conform to the dimensions and electrical specifications for the headlamp source it is intended to replace. For example, if an HID kit is marketed as replacing an H1 light source, then it must match the H1's wire coil filament size and location, the electrical connector size and location and the ballast design for use with an H1 light source (which is impossible since there is no ballast). Consequently, companies that are manufacturing HID light sources (e.g., D1S, D1R, D2S, D2R, 9500, etc�) with incandescent light source bases (e.g., H1, H3, H7, H8, H9, H11, H13, HB1, HB2, HB3, HB4, HB5, etc) should be aware that this light source design would not be one that conforms to FMVSS No. 108, and could not be imported and sold in the United States without violating Federal law. (The importer is treated as the manufacturer and subject to the same fines and penalties that apply to a domestic manufacturer.) NHTSA has also determined that a commonly used disclaimer "for off-road use only" has no legal meaning and is not recognized by the agency as the manufacturer, importer and retailer are not in a position to control use once a product has been sold. Any equipment offered for sale which is covered by FMVSS No. 108 (headlamps, taillamps, side markers, etc.) must comply with the standard. |
|
|
|
Anybody had success adding a DVD player to their 2008 Accord? Through the dealer or after market? Screen in head rest or ceiling? How much? Any recommendations?
|
|
|
Replying to: larryallen707 (Jun 12, 2008 6:26 pm) |
|
|
Replying to: bvdj84 (Feb 17, 2008 8:42 am) Thanks |
|
|
I just received my fitted cargo liner and floor mats from Weathertech. They have a nice look and feel to them. I'm glad I went with these instead of the ones from Honda, look forward to years of use. There is about a 2 week wait on them since they don't stock them. Aside from the wait, I am very pleased! |
|
|
|
As we keep our cars forever, I'm concerned about scuffing the shiny door sills on our new Accord. I've seen protective tape for hoods, bumpers, headlights, etc. Who makes a durable, clear tape for door sills? Thanks in advance.
|
|
|
|
|
Replying to: victoryspeedwy (Jul 04, 2008 3:48 am) There are also sill protectors for the Accord that are not the tape film type. Here is an example of what's out there: http://www.collegehillshonda.com/honda_accord_4dr_accessories/2008_accord_interi- - or.htm Mrbill |
|
You are here:
Forums
Sedans
Honda Accord
2008-2009 Honda Accord Accessories
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Honda Accord



Browse by Board
Browse by Topic
Today's Chats