Last post on Aug 17, 2013 at 5:07 PM
You are in the Speed Shop Tuning and Modification
What is this discussion about?
Dodge Stealth, Mitsubishi 3000GT, Auto Repair
#1 of 89 dodge stealth Twin Turbo
Nov 16, 2007 (2:53 pm)
Does anyone know what my problem could be? When i accelerate my car shakes and if i push on the gas harder there is a popping noise kinda like a muffled backfire. Very bad throttle response.
#2 of 89 Re: dodge stealth Twin Turbo [herman1117]
Nov 28, 2007 (4:41 pm)
check the catalytic converter for clogging or a breakdown of materials there-in.
#3 of 89 Re: dodge stealth Twin Turbo [railroadjames]
Dec 02, 2007 (3:17 am)
you need to check fuel filter(s).
main line would be a quick fix,however may be the one in your tank.
i signed up to this board just to tell u this,so let me know how you make out.i,m a betting man,i,d bet money this is your grief.
Jan 12, 2008 (10:33 pm)
I have been looking everywhere for a 5 speed transmission for my 1996 dodge stealth R/T i had blown the engine in it so i had put a 1994 mitsubishi 3000GT motor with an automatic trans its the same engine i previously had in my car but i need a trans my old one need rebuilding (let my girlfriend drive it and she grinded the gears to crap lol)
#5 of 89 1991 dodge stealth
Mar 14, 2008 (9:20 am)
My Dodge Stealth is a 1991 3.0 dual overhead cam not a turbo, one of the coil packs will not fire at all, i changed the coil pack, i then changed the ignition module, no help it runs perfect except for that. the check engine light comes on for a couple seconds after i start the engine, please i need help
#6 of 89 Re: 1991 dodge stealth [rodeojeff]
Mar 19, 2008 (9:19 am)
If you have your check engine light on, why don't you just get the code it's throwing, that will tell you the specific issue your car is having.
#7 of 89 The electronic supension system
Apr 02, 2008 (4:14 pm)
I have a 91 Non turbo RT model with electronic suspension. After a fer second suspension indicator start blinking. I have change the suspenion on front and rear.
Can you tell me what is the problem . the ride is rough
#8 of 89 Re: 1991 dodge stealth [rodeojeff]
Apr 24, 2008 (5:27 am)
in regaurds to you post about no spark on 1 coil check your ptu and ecu make sure your getting a signal out of the ptu and if you are not check for signal coming out of the ecu mine had the same problem and the ptu was bad it worked but now i gots no spark at all so im basically throwing parts at it hopeing it will start working again
May 25, 2008 (5:54 pm)
I have a 92 Dodge Stealth 3.0 v-6 Twin Turbo,
Now my car is backfiren, but the funny thing is that the firen order is off by 2 cylinders, the book says 1-4-2-5-3-6, but the way i have it is 1-2-4-5-3-6 and it seems to run a lot better then the way the book says, the book way gives me Poor Accel, Backfire, and somewhat hard to start, but my way the car will not backfire "as much" but starts Quicker, and a whole lot better Accel. Can someone plz help me, iv been worken on this problem for 2 months now, so i really need your help, tell me what i should do, or what could be the problem, Could it be my valves. some kind of sensiour, why dose it run better with a messed up firing order.
And so think u, for taking the time to help,
#10 of 89 Re: 1991 dodge stealth [sunni_18m]
May 25, 2008 (6:00 pm)
try ur Transister