Sign In Join 



Add 5 - 10 HP to your Sedona

11 messages,  Last post on Feb 24, 2009 at 6:40 AM

You are in the Kia Sedona Forum. Your Host is Karens

What is this discussion about? Kia Sedona, Van


Messages Page 2 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion

#6 of 11
by lavrishevo
Aug 01, 2008 (2:45 pm)
Reply
Sorry, as high as 30 mpg not 28. I am averaging 28 mph on the hwy at 65 mph.
#7 of 11
by dantana01
Aug 04, 2008 (5:00 am)
Reply
I've been considering increasing my air pressure and getting a K&N filter, plus I put 245X65 tires and that increased mileage too. Granted I don't have a Sedona (yet) but the larger tires should help you as well. I have a Saturn and considering trading for a Kia, I've been trying to learn as much as I can about them before I pull the trigger.
#8 of 11
by gtixpress
Oct 11, 2008 (4:41 am)
Reply
There is no way this will make 5-10 HP. All your doing is pulling in hot air from the engine bay which hurts performance.
#9 of 11
Re: Add 5 - 10 HP to your Sedona [lavrishevo] by rampco
Jan 29, 2009 (6:09 pm)
Reply

Replying to: lavrishevo (Nov 15, 2007 7:17 pm)

Nice Mod. What is the part number of the filter you used? Removing the screen off the MAF is where you probably get your biggest gain. This is a well know performance mod. I've done it myself on a 2001 Camaro SS I used to have and that alone was Dyno tested good for 10 Hp on that car.
#10 of 11
Re: Add 5 - 10 HP to your Sedona [lavrishevo] by rampco
Feb 07, 2009 (10:28 am)
Reply

Replying to: lavrishevo (Nov 15, 2007 7:17 pm)

I am reposting again because I did the mod but a little differn't. First thing, this mod does work (at least for me and I should have known it would have because I have done things like this to performance cars that I have had). Around town mileage (this is where I was concerned) improved after the mod (an improvement around town means highway mileage would also go up). My mileage went from an average of 17.2 mpg (urban city) to 18.2 plus (urban city). I did this test over a 1 month period (2 weeks testing before the mod, and 2 weeks testing after the mod). The 1 mpg (urban city) increase in mpg is impressive (I did not change my driving habits, the weather was the same). I took out the MAF screen (this is the real meat of the mod) but did not put a cone filter in. Instead, I put in a K&N replacement filter (with this engine, the cone fitler is not necessary, the best results with cone filters are with big cubes or high rpm engines). Anyhow, great mod (one that works, just be carefule taking the MAF screen out, a new MAF costs about $110 if ever needed).
#11 of 11
Re: Add 5 - 10 HP to your Sedona [rampco] by lavrishevo
Feb 24, 2009 (6:40 am)
Reply

Replying to: rampco (Feb 07, 2009 10:28 am)

Rampco,
 
Great to see it is working for you too. I also notice the a couple of the same things as you. I have both the k&n drop in filter and the cone.
 
In my opinion the van is a little faster with the cone but low end torque is sacrificed a tad for high end HP. Not that I am racing the van just seeing how different configurations work out. I have thought about replacing the whole intake tube but have not found anything that I like right now.

Messages Page 2 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics
Advertisement