Sign In Join 



Dodge Ram Steering Problems

17 messages,  Last post on Nov 14, 2009 at 7:26 AM

You are in the Dodge Ram Forum. Your Host is kcram

What is this discussion about? Dodge Ram Pickup 2500, Car Safety, Steering, Truck


Messages Page 1 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion

#1 of 17
steering problem 2001 dodge quad cab 4x4diesel 2500 by oldie2
Nov 15, 2007 (5:49 pm)
Reply
Is it possible to adjust the power steering box on this dodge truck
#2 of 17
steering loose 01 2500 by steckslm
Feb 13, 2008 (4:04 pm)
Reply
I replaced the steering box three times on my ram. It is still loose. The rest of the steering is tight but the shaft on the box looks to be lose ive tryed to adjust the box, too tight gives me memory steer. Love the truck, hate to drive it. Took it to many mech. there all clueless. Someone please helppppppppppp.
#3 of 17
Steering Problem by michellem13
Dec 21, 2008 (2:40 pm)
Reply
While making a left turn my the steering on my 2002 Dodge Ram 2500 went bad. While trying to change lanes to the right my stering was hard to turn and it seemed as if I was still turning left while in fact I was moving toward the right in an effort to switch lanes. It almost seems as if the pwer steering pump has gone out but I am uncertain about this or the fact that my steering wanted to stay turned (to the left) while I was driving straight and moving toward the right hand lane. Can any one point me in the right direction?
#4 of 17
Re: steering loose 01 2500 [steckslm] by cummins85
Jan 15, 2009 (5:32 pm)
Reply

Replying to: steckslm (Feb 13, 2008 4:04 pm)

hey man did you have any luck with the post on steering being loose? i have the same exact problem with my cummins.i put a agr steering 2 box on it .and it is no different.let me know .thax
#5 of 17
wbarnes by wbarnes
Jan 16, 2009 (8:05 pm)
Reply
I am having the same loose steering problem with my 01 dodge 2500.The gearbox input shaft has a lot of play with no movement on the output.Is this gearbox adjustable?
#6 of 17
Dodge Steer Wander by yotachev
Jan 18, 2009 (1:12 pm)
Reply
After 2 months of scratching my head over my newer cummins steer issue. I believe the solution assuming ALL steer conponents are tight and in good condition is... BD offers a steering box stabilizer that assist in locking your frame rails to the steering gear or sector shaft to reduce steering gear twisting from high torque and weight of the cummins eng.. thus eliminating most of the dodge wander...
#7 of 17
Re: steering loose 01 2500 [cummins85] by cummins01
Mar 02, 2009 (8:10 pm)
Reply

Replying to: cummins85 (Jan 15, 2009 5:32 pm)

Hey was wondering if you ever figured out your steering problem? I have the same problem! Installed new track bar,ball joints,tie rod ends and it still wonders all over the road! Let me know if you have any ideas Thanks
#8 of 17
07.5 Ram Steering Problem by tames
Apr 22, 2009 (11:35 am)
Reply
I have a 2007.5 2500 with a Cummins that I have put over $2000.00 dollars in the front end and it still steers like a herd of cows. Anybody else have a solution to the problem. The truck has just over 50,000 miles
#9 of 17
Dodge Ram Steering Wander check list...03 and UP 3/4 1 ton trucks by yotachev
Apr 22, 2009 (6:08 pm)
Reply
I have spent many hours on the notorious dodge wander and hope my check list will eliminate most of your wander assuming your truck is stock..
1)check tire pressures/ tires and vehicle toe in...
2)check for excessive play in tie rod and draglink ends.
3)remove dampener/steer stabilizer check absorbtion
4)check for worn u joints on steer shaft
5)lift truck and check front wheel bearings for excessive play
6)with truck lifted check ball joints
7)with truck still lifted place a long screwdriver between the upper ball joint and axle.
the upper ball joint must move a slight up and down. if no movement replace upper ball joint with dodge ball joints only..
8)Check steering gear/ steer box for excessive play
9)install BD steer stabilizer
hope some of the info helps in isolating the dodge wander problem
#10 of 17
Re: Dodge Ram Steering Wander check list...03 and UP 3/4 1 ton trucks [yotachev] by tames
Apr 23, 2009 (4:24 am)
Reply

Replying to: yotachev (Apr 22, 2009 6:08 pm)

Thanks for the response, I have done everything on your list except the BD steer stabilizer, I will try that next.

Messages Page 1 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement