Last post on Sep 08, 2008 at 4:07 PM
You are in the Speed Shop Tuning and Modification
What is this discussion about?
Honda Civic, Honda Civic del Sol, Honda Civic CRX, Coupe, Sedan
#2 of 5 Re: Info on 1.5 to a 1.6 Motor swap [playingwithmud]
Dec 14, 2007 (5:09 pm)
watsup....the crx motor will not work in your hatch cause' the harness is different... i suggest you get the newer engine any year 92-95 civic ex si
#3 of 5 honda crx engines
Aug 10, 2008 (2:41 pm)
I need to know which engines will fit in my 1986 honda crx.
#4 of 5 89 honda civic hatch
Sep 08, 2008 (11:51 am)
hey guys i have a swap on my hands an i didn't know it so far it coming along good but my problem is timing i was told cuz of the computer in the car i have to run the same year distributor but a have a 95 civic full time vtec motor. now the spread on the bolt pattern is different. what do i do about that.
#5 of 5 Re: Info on 1.5 to a 1.6 Motor swap [playingwithmud]
Sep 08, 2008 (4:07 pm)
Well I finished the motor swap and everything bolts up for the most part. I used the old intake beacuse it had a bigger throtle body on it so I needed to make a braket for the MAP sensor and just put a vacume to it. I also had to put slots on the injector connector so they would connect to the 1.6 injectors witch was very simple to do. There were very few things that were diferent and the swap was simple. The one main thing is though that I didnt know till now is that the 1988 and the 1993 distributors were diferent so I was having a hard time timeing it. They must be clocked diferently so I couldnt get it in time. I put on the older distibutor and it worked fine and ran awsome. The dristributor years goes I belive 1986-1991 then 1992-1995 so I had to get a new distributor. Other than that very easy to do.