You are here: Forums SUVs GMC Yukon GMC Yukon Noises and Sounds

GMC Yukon Noises and Sounds

79 messages,  Last post on Nov 13, 2009 at 12:14 PM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon, GMC Yukon Denali, GMC Yukon XL, SUV

Messages Page 9 of 9 1 ... 3 4 5 6 7 8 9 Prev Next Last

Go To Msg # Search This Discussion

#73 of 79 04 Yukon 5.3 OBD II plug dead. by mready Nov 05, 2009 (5:14 pm)
My wife's truck is an 04 Yukon with a 5.3 V8. Engine light came on today, but when I plugged in my scanner to pull the code, nothing happened. Nothing on screen, no scan, Nada. I plugged the scanner into my Silverado and it worked just fine. Cannot find any bad fuses either in the cab fuseblock or under the hood. Any ideas?? Replies to this message: rsht (Nov 10, 2009 3:08 pm) mready (Nov 10, 2009 6:09 pm)
#74 of 79 Re: Road Noise [gstorie] by mready Nov 05, 2009 (5:22 pm)
Replying to: gstorie (Mar 31, 2008 10:32 am) Take a look at the gasket around the rear liftgate. I had the same problem & when I put it back together and glued it back in place, presto! no more road noise.
#75 of 79 Re: 04 Yukon 5.3 OBD II plug dead. [mready] by rsht Nov 10, 2009 (3:08 pm)
Replying to: mready (Nov 05, 2009 5:14 pm) I wonder if your scanner is only equipped to pickup the the engine trouble codes, meaning those codes starts with "P"... while the light may be triggered by some sort of body related issues??? Just a guess. Replies to this message: mready (Nov 10, 2009 6:09 pm)
#76 of 79 Re: 04 Yukon 5.3 OBD II plug dead. [rsht] by mready Nov 10, 2009 (6:09 pm)
Replying to: rsht (Nov 10, 2009 3:08 pm) Never thought of that. Would make sense with the solid idiot light, not flashing. But my scanner should activate anyway when plugged in. I'll have someone at a shop plug theirs in to try. Thanx
#77 of 79 99 mercury sable by momoftwins1 Nov 11, 2009 (10:45 am)
we bought a mercury sable from individual and we had to replace alternator and new battery , and we are having a draining of the battery problem over night. Nothing is left on and we have to unplug it every time we park it. We took it and put it on a DC and nothing is coming up, can the DC read the memory even tho the battery has been disconnected for a long time on the car? also when the car is shut off and keys out of ignition and door open the door dingeris going off even when lights and nothing is on? could this be the problem to our drainage and how do we fix it?? Thank you very much Replies to this message: tidester (Nov 11, 2009 8:56 pm) momoftwins1 (Nov 13, 2009 12:14 pm)
#78 of 79 Re: 99 mercury sable [momoftwins1] by tidester HOST Nov 11, 2009 (8:56 pm)
Replying to: momoftwins1 (Nov 11, 2009 10:45 am) Head over to Taurus/Sable Electrical Problems to ask about your Sable's problems. This discussion is about the GMC Yukon.   tidester, host SUVs and Smart Shopper Replies to this message: momoftwins1 (Nov 13, 2009 12:14 pm)
#79 of 79 Re: 99 mercury sable [tidester] by momoftwins1 Nov 13, 2009 (12:14 pm)
Replying to: tidester (Nov 11, 2009 8:56 pm) Thank you for the sight and pardon me and so very sorry. Thank you again for your redirection.

Messages Page 9 of 9 1 ... 3 4 5 6 7 8 9 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs GMC Yukon GMC Yukon Noises and Sounds