You are here: Forums SUVs GMC Yukon GMC Yukon Noises and Sounds

GMC Yukon Noises and Sounds

79 messages,  Last post on Nov 13, 2009 at 12:14 PM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon, GMC Yukon Denali, GMC Yukon XL, SUV

Messages Page 8 of 9 1 ... 3 4 5 6 7 8 9 Prev Next Last

Go To Msg # Search This Discussion

#66 of 79 Re: 03 Denali rattle in headliner [jpf1603] by antifreeeez Aug 24, 2009 (5:06 pm)
Replying to: jpf1603 (Dec 20, 2007 6:37 am) have u solve your problem ??? because i pry mine out and disconnected . much better!!
#67 of 79 Re: 1997 Yukon Clunking noise when breaking and release [silverwolf2253] by antifreeeez Aug 24, 2009 (5:20 pm)
Replying to: silverwolf2253 (May 04, 2008 6:24 pm) I have the same problem, Have u reach a solution. Mine has gotton so bad now it clunk 30 to 35 miles an hour when i accelerate.
#68 of 79 dont know what is wrong by momoftwins1 Aug 26, 2009 (7:35 pm)
I have a 2001 Yukon XL and I have had a noise that sounds like a motorcycle is reviving up and gets real loud when push on gas(this is the best noise i can compare it too)It is coming from the dash area it seems, but doesnt do it all the time and now there is a loud grinding noise when i push on the gas and i could only go 10mph. When I stop the vehicle and tried to go again it was fine. It is driving me crazy and scaring me all at once. Please if any one has any idea please let me know. Thank you so much.
#69 of 79 is exhaust suppose to smell like gasoline? by momoftwins1 Aug 26, 2009 (8:12 pm)
Some one had suggested it may be the cat converter and to see if my exhaust smells like sulfar but it doesnt smell like that but of gasoline so is that another concern?
#70 of 79 Re: 2004 Yukon-popping noise when turn [iipacfan] by bigdawg42 Sep 04, 2009 (4:49 am)
Replying to: iipacfan (Jan 30, 2007 10:13 pm) HEY GUYS I HAD THE SAME PROBLEM FOR A YEAR. TOOK IT TO GMC A FEW TIMES AND THEY COULD NOT FIX THE PROBLEM TOOK IT TO MY MECHANIC AND HE REPLACED THE STEERING SHAFT AND IT WORKED. HE ALSO SO SAID THAT THERE SHOULD BE A RECALL ON THIS PART BECAUSE HE HAS SEEN THIS PROBLEM FROM 2001 THRU 2005 DANALI. OUT OF POCKET COST PARTS AND LABOR $241.00.
#72 of 79 Rattle in dash on 2007 Yukon by nfenndog Nov 02, 2009 (5:37 pm)
I have a 2007 Yukon SLT. I love the truck but a rattle just appeared. I have 38K on it and haven't had a problem yet. The rattle sounds like a metal fan blade has something in it. I don't thinkt that's what it is but it's what it sounds like. It doesn't appear till I'm going 35 and it stops when I get over 45 mph. When I slow down to 45, it appears and disappears when I slow below 35. Any thoughts on what it would be?
#73 of 79 04 Yukon 5.3 OBD II plug dead. by mready Nov 05, 2009 (5:14 pm)
My wife's truck is an 04 Yukon with a 5.3 V8. Engine light came on today, but when I plugged in my scanner to pull the code, nothing happened. Nothing on screen, no scan, Nada. I plugged the scanner into my Silverado and it worked just fine. Cannot find any bad fuses either in the cab fuseblock or under the hood. Any ideas?? Replies to this message: rsht (Nov 10, 2009 3:08 pm) mready (Nov 10, 2009 6:09 pm)
#74 of 79 Re: Road Noise [gstorie] by mready Nov 05, 2009 (5:22 pm)
Replying to: gstorie (Mar 31, 2008 10:32 am) Take a look at the gasket around the rear liftgate. I had the same problem & when I put it back together and glued it back in place, presto! no more road noise.
#75 of 79 Re: 04 Yukon 5.3 OBD II plug dead. [mready] by rsht Nov 10, 2009 (3:08 pm)
Replying to: mready (Nov 05, 2009 5:14 pm) I wonder if your scanner is only equipped to pickup the the engine trouble codes, meaning those codes starts with "P"... while the light may be triggered by some sort of body related issues??? Just a guess. Replies to this message: mready (Nov 10, 2009 6:09 pm)

Messages Page 8 of 9 1 ... 3 4 5 6 7 8 9 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs GMC Yukon GMC Yukon Noises and Sounds