You are here: Forums SUVs GMC Yukon GMC Yukon Noises and Sounds

GMC Yukon Noises and Sounds

79 messages,  Last post on Nov 13, 2009 at 12:14 PM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon, GMC Yukon Denali, GMC Yukon XL, SUV

Messages Page 7 of 9 1 ... 3 4 5 6 7 8 9 Prev Next Last

Go To Msg # Search This Discussion

#54 of 79 Re: 2004 GMC Yukon Denali Squeeks [rsht] by bdlif Jul 03, 2008 (10:57 am)
Replying to: rsht (Jul 02, 2008 12:51 pm) Thanks it took me a while but I discovered it was the u joint needing oil. Unfortunately on the 04's you have to replace the u joint, on the newer models you can collapse the joint and apply oil but I apreciate the help.
#55 of 79 Re: 2004 Yukon-popping noise when turn [jennmw] by mbeaud Aug 24, 2008 (4:18 pm)
Replying to: jennmw (Oct 16, 2006 11:23 am) I have a 2003 and the same thing happens. It feels like there is something loose in the steering column also. I know that when it was under warranty they replaced it and it worked for awhile. It only has 35,000 miles on it and it sounds and feels awful.
#56 of 79 Re: 1997 Yukon Clunking noise when breaking and release [silverwolf2253] by tnt68 Apr 06, 2009 (10:22 am)
Replying to: silverwolf2253 (May 04, 2008 6:24 pm) silverwolf, Did you solve your clunking problem. I have a 2000 GMC Denali and it makes the same sound as you describe. tnt68
#57 of 79 2007 Yukon XL loud rattle/grinding sound by blaktransam Apr 30, 2009 (5:17 pm)
Today, out of nowhere my 2007 Yukon XL with 52kmiles started making a horrendous grinding rattling sound in the rear (I think it originates in right rear but can't be sure as it's very loud when standing on the left too).   It sounds like there are rocks inside a hubcap. Of course there are no hubcaps on this but that is what it sounds like.   Literally out of nowhere.   Any ideas? Replies to this message: ahightower (May 01, 2009 5:03 am) blaktransam (May 01, 2009 5:12 am) blaktransam (May 01, 2009 11:45 am)
#58 of 79 Re: 2007 Yukon XL loud rattle/grinding sound [blaktransam] by ahightower May 01, 2009 (5:03 am)
Replying to: blaktransam (Apr 30, 2009 5:17 pm) When driving or only when parked? Is it coming from the exhaust? Replies to this message: blaktransam (May 01, 2009 5:12 am) blaktransam (May 01, 2009 11:45 am)
#59 of 79 Re: 2007 Yukon XL loud rattle/grinding sound [ahightower] by blaktransam May 01, 2009 (5:12 am)
Replying to: ahightower (May 01, 2009 5:03 am) It happened when the vehicle was in motion. Very slow, just starting to move. Both in reverse and going forward. Replies to this message: blaktransam (May 01, 2009 11:45 am)
#60 of 79 Re: 2007 Yukon XL loud rattle/grinding sound [blaktransam] by blaktransam May 01, 2009 (11:45 am)
Replying to: blaktransam (May 01, 2009 5:12 am) Dealer checked it. Turns out it was a stone in the break caliper (right rear)
#61 of 79 Re: What's the noise I hear when I open the door? [10mikeymike] by truemoxy May 07, 2009 (8:35 am)
Replying to: 10mikeymike (Jul 25, 2007 3:46 pm) The sound you are hearing is coming from your climate control aspirator. It is normal and sounds like a little sneeze or digital camera. It is taking a sample of the cabin atmosphere for the Auto Climate Control.
#62 of 79 Pleasing Sounds by cargeek5 Jun 09, 2009 (8:05 am)
All the sounds you are hearing might be annoying but the sound the comes from my 2008 Yukon XL Denali exhaust is a very pleasing one especially for a full size SUV. It isn't a loud straight pipe but it isn't strained sound like a muzzle on a dog. It wants to make a sound but it just cant. The sound is a low grumble that catches your attention yet it doesn't distract you. The note is something that GM got right on this vehicle!
#63 of 79 04 Denali drivetrain noises by dandanzoo Jun 12, 2009 (3:44 pm)
I have an 04 Denali with 90k. Its been making a sound and as you drive faster it becomes more high pitched. I had my carrier bearing replaced last year so its not that. Also after it shifts gear it seams to quiet until it shifts again. There are no tranny problems, runs beautifully. Ive been told it could be a u-joint or maybee a wheel bearing. Sounds like its coming from the back to mid. Any info will be greatly appreciated because i will be doing the job myself. Thanks, Dan. Replies to this message: rsht (Jun 14, 2009 1:47 pm)

Messages Page 7 of 9 1 ... 3 4 5 6 7 8 9 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs GMC Yukon GMC Yukon Noises and Sounds