You are here: Forums SUVs GMC Yukon GMC Yukon Noises and Sounds

GMC Yukon Noises and Sounds

79 messages,  Last post on Nov 13, 2009 at 12:14 PM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon, GMC Yukon Denali, GMC Yukon XL, SUV

Messages Page 6 of 8 1 2 3 4 5 6 7 8 Prev Next Last

Go To Msg # Search This Discussion

#50 of 79 Re: 2004 Yukon-popping noise when turn [tidester] by 02xldenali May 13, 2008 (10:44 am)
Replying to: tidester (Jan 30, 2007 11:11 pm) Hi I also have this problem on my 2002 Denali Xl.It is horrible it feels like my left side of mu Denali wants to rip off my rims.Whats the problem for that I already changed the the whole left side drive shaft axle unit but not fied yet??Any help please.
#52 of 79 2004 GMC Yukon Denali Squeeks by bdlif Jul 02, 2008 (10:19 am)
I have a 2004 Denali XL that has a squeek at the front but it's not the brakes. The squeek only comes from a full stop to about 30mph while accelerating. When it rains for a few days the squeek goes away untill it gets hot and dry. Can anyone tell me where to start looking. Replies to this message: rsht (Jul 02, 2008 12:51 pm) bdlif (Jul 03, 2008 10:57 am)
#53 of 79 Re: 2004 GMC Yukon Denali Squeeks [bdlif] by rsht Jul 02, 2008 (12:51 pm)
Replying to: bdlif (Jul 02, 2008 10:19 am) Bushing(s)... I would check the sway bar bushings and also joints/links. I have used WD-40 before (lubricant that can be washed off with water if necessary) to locate the cause. Good Luck! Replies to this message: bdlif (Jul 03, 2008 10:57 am)
#54 of 79 Re: 2004 GMC Yukon Denali Squeeks [rsht] by bdlif Jul 03, 2008 (10:57 am)
Replying to: rsht (Jul 02, 2008 12:51 pm) Thanks it took me a while but I discovered it was the u joint needing oil. Unfortunately on the 04's you have to replace the u joint, on the newer models you can collapse the joint and apply oil but I apreciate the help.
#55 of 79 Re: 2004 Yukon-popping noise when turn [jennmw] by mbeaud Aug 24, 2008 (4:18 pm)
Replying to: jennmw (Oct 16, 2006 11:23 am) I have a 2003 and the same thing happens. It feels like there is something loose in the steering column also. I know that when it was under warranty they replaced it and it worked for awhile. It only has 35,000 miles on it and it sounds and feels awful.
#56 of 79 Re: 1997 Yukon Clunking noise when breaking and release [silverwolf2253] by tnt68 Apr 06, 2009 (10:22 am)
Replying to: silverwolf2253 (May 04, 2008 6:24 pm) silverwolf, Did you solve your clunking problem. I have a 2000 GMC Denali and it makes the same sound as you describe. tnt68
#57 of 79 2007 Yukon XL loud rattle/grinding sound by blaktransam Apr 30, 2009 (5:17 pm)
Today, out of nowhere my 2007 Yukon XL with 52kmiles started making a horrendous grinding rattling sound in the rear (I think it originates in right rear but can't be sure as it's very loud when standing on the left too).   It sounds like there are rocks inside a hubcap. Of course there are no hubcaps on this but that is what it sounds like.   Literally out of nowhere.   Any ideas? Replies to this message: ahightower (May 01, 2009 5:03 am) blaktransam (May 01, 2009 5:12 am) blaktransam (May 01, 2009 11:45 am)
#58 of 79 Re: 2007 Yukon XL loud rattle/grinding sound [blaktransam] by ahightower May 01, 2009 (5:03 am)
Replying to: blaktransam (Apr 30, 2009 5:17 pm) When driving or only when parked? Is it coming from the exhaust? Replies to this message: blaktransam (May 01, 2009 5:12 am) blaktransam (May 01, 2009 11:45 am)
#59 of 79 Re: 2007 Yukon XL loud rattle/grinding sound [ahightower] by blaktransam May 01, 2009 (5:12 am)
Replying to: ahightower (May 01, 2009 5:03 am) It happened when the vehicle was in motion. Very slow, just starting to move. Both in reverse and going forward. Replies to this message: blaktransam (May 01, 2009 11:45 am)

Messages Page 6 of 8 1 2 3 4 5 6 7 8 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs GMC Yukon GMC Yukon Noises and Sounds