- #47 of 79
-
Re: O2 Denali Xl makes poping noise when turning.Help [02xldenali]
by silverwolf2253
-
May 09, 2008 (6:28 pm)
-
|
|
Replying to: 02xldenali (May 06, 2008 11:48 pm)
I have seen on a differnt board here that something around the same to the problem you speak of is a recall and something to do with the steering column(sp?) but I could be wrong.
Have you talked to a GM service shop?
|
- #48 of 79
-
Re: O2 Denali Xl makes poping noise when turning.Help [02xldenali]
by rsht
-
May 10, 2008 (8:20 am)
-
|
|
Replying to: 02xldenali (May 06, 2008 11:48 pm)
Check out the post below, may be the same issue:
http://townhall-talk.edmunds.com/direct/view/.ef16f16/627!keywords=#628
|
- #49 of 79
-
O2 Denali Xl makes poping noise when turning.Help
by 02xldenali
-
May 10, 2008 (2:31 pm)
-
|
|
Yea but it feels like the rims want to pop[ off when turning slow.Im so confused.
|
- #50 of 79
-
Re: 2004 Yukon-popping noise when turn [tidester]
by 02xldenali
-
May 13, 2008 (10:44 am)
-
|
|
Replying to: tidester (Jan 30, 2007 11:11 pm)
Hi I also have this problem on my 2002 Denali Xl.It is horrible it feels like my left side of mu Denali wants to rip off my rims.Whats the problem for that I already changed the the whole left side drive shaft axle unit but not fied yet??Any help please.
|
- #52 of 79
-
2004 GMC Yukon Denali Squeeks
by bdlif
-
Jul 02, 2008 (10:19 am)
-
|
|
I have a 2004 Denali XL that has a squeek at the front but it's not the brakes. The squeek only comes from a full stop to about 30mph while accelerating. When it rains for a few days the squeek goes away untill it gets hot and dry. Can anyone tell me where to start looking.
|
- #53 of 79
-
Re: 2004 GMC Yukon Denali Squeeks [bdlif]
by rsht
-
Jul 02, 2008 (12:51 pm)
-
|
|
Replying to: bdlif (Jul 02, 2008 10:19 am)
Bushing(s)... I would check the sway bar bushings and also joints/links. I have used WD-40 before (lubricant that can be washed off with water if necessary) to locate the cause. Good Luck!
|
- #54 of 79
-
Re: 2004 GMC Yukon Denali Squeeks [rsht]
by bdlif
-
Jul 03, 2008 (10:57 am)
-
|
|
Replying to: rsht (Jul 02, 2008 12:51 pm)
Thanks it took me a while but I discovered it was the u joint needing oil. Unfortunately on the 04's you have to replace the u joint, on the newer models you can collapse the joint and apply oil but I apreciate the help.
|
- #55 of 79
-
Re: 2004 Yukon-popping noise when turn [jennmw]
by mbeaud
-
Aug 24, 2008 (4:18 pm)
-
|
|
Replying to: jennmw (Oct 16, 2006 11:23 am)
I have a 2003 and the same thing happens. It feels like there is something loose in the steering column also. I know that when it was under warranty they replaced it and it worked for awhile. It only has 35,000 miles on it and it sounds and feels awful.
|
- #56 of 79
-
Re: 1997 Yukon Clunking noise when breaking and release [silverwolf2253]
by tnt68
-
Apr 06, 2009 (10:22 am)
-
|
|
Replying to: silverwolf2253 (May 04, 2008 6:24 pm)
silverwolf,
Did you solve your clunking problem. I have a 2000 GMC Denali and it makes the same sound as you describe.
tnt68
|