You are here: Forums SUVs GMC Yukon GMC Yukon Noises and Sounds

GMC Yukon Noises and Sounds

79 messages,  Last post on Nov 13, 2009 at 12:14 PM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon, GMC Yukon Denali, GMC Yukon XL, SUV

Messages Page 5 of 8 1 2 3 4 5 6 7 8 Prev Next Last

Go To Msg # Search This Discussion

#41 of 79 Re: Grinding noise when turning [c650] by rsht Apr 14, 2008 (3:36 am)
Replying to: c650 (Apr 13, 2008 5:52 pm) Does the grinding noise appear when you turn the steering left or right or either way, and if the noise appears only when the steering is turned all-the-way to the end? Have you tried to apply the brakes just lightly without stopping the car (when you hear the grinding noise) to see if the grinding noise disappears? If yes, if may be just one of the brake pads rubbing against the rotor... Replies to this message: c650 (Apr 14, 2008 3:51 am)
#42 of 79 Re: Grinding noise when turning [rsht] by c650 Apr 14, 2008 (3:51 am)
Replying to: rsht (Apr 14, 2008 3:36 am) The noise appears while turning to the left and right, just had the brakes completely redone. Applying the brakes has no effect.
#44 of 79 1997 Yukon Clunking noise when breaking and release by silverwolf2253 May 04, 2008 (6:24 pm)
I have a 97 Yukon that I love. It has developed a clunking noise when I come to a complete stop and then when I release the break to go. I had this same problem with a 96 Tahoe I had a few years back. I had the breaks done, diff. fluid changed and u joints changed and it solved that problem for about a year. Then I traded it in for a Ford....never again might I add. Well anyway...My Yukon is now doing the same thing. I had it looked at and the mech. told me to grease the slip yoke and it was dry. So I had that done and it solved the problem but for only a few weeks. Now it is starting to come back. He told me to buy this nickel plated slip yoke for over $200 but a different mech. told me that it wont solve the problem as his truck does the same thing and has for over 40k miles. I want the clunk gone and have heard many different things it could or couldnt be. Like the rear leaf springs could be clapping, a clip in the transfer case, the slip yoke needs to be replaced...etc...   Has anyone else had this problem and how did they solve/fix the problem.   Thank you. Can be reached at silver_wolf2253yahoo.com Replies to this message: tnt68 (Apr 06, 2009 10:22 am) antifreeeez (Aug 24, 2009 5:20 pm)
#46 of 79 O2 Denali Xl makes poping noise when turning.Help by 02xldenali May 06, 2008 (11:48 pm)
Hi I have a 2002 gmc Yukon Denali XL and it makes a poping sound when I turn the wheel to the left when im parking.I was told it was the drive axles so I replaced them (Both left side)any other suggestions I would appreciate it.Thanks. Replies to this message: silverwolf2253 (May 09, 2008 6:28 pm) rsht (May 10, 2008 8:20 am)
#47 of 79 Re: O2 Denali Xl makes poping noise when turning.Help [02xldenali] by silverwolf2253 May 09, 2008 (6:28 pm)
Replying to: 02xldenali (May 06, 2008 11:48 pm) I have seen on a differnt board here that something around the same to the problem you speak of is a recall and something to do with the steering column(sp?) but I could be wrong. Have you talked to a GM service shop?
#48 of 79 Re: O2 Denali Xl makes poping noise when turning.Help [02xldenali] by rsht May 10, 2008 (8:20 am)
Replying to: 02xldenali (May 06, 2008 11:48 pm) Check out the post below, may be the same issue: http://townhall-talk.edmunds.com/direct/view/.ef16f16/627!keywords=#628
#49 of 79 O2 Denali Xl makes poping noise when turning.Help by 02xldenali May 10, 2008 (2:31 pm)
Yea but it feels like the rims want to pop[ off when turning slow.Im so confused.
#50 of 79 Re: 2004 Yukon-popping noise when turn [tidester] by 02xldenali May 13, 2008 (10:44 am)
Replying to: tidester (Jan 30, 2007 11:11 pm) Hi I also have this problem on my 2002 Denali Xl.It is horrible it feels like my left side of mu Denali wants to rip off my rims.Whats the problem for that I already changed the the whole left side drive shaft axle unit but not fied yet??Any help please.

Messages Page 5 of 8 1 2 3 4 5 6 7 8 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs GMC Yukon GMC Yukon Noises and Sounds