You are here: Forums SUVs GMC Yukon GMC Yukon Noises and Sounds

GMC Yukon Noises and Sounds

74 messages,  Last post on Nov 05, 2009 at 5:22 PM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon, GMC Yukon Denali, GMC Yukon XL, SUV

Messages Page 5 of 8 1 2 3 4 5 6 7 8 Prev Next Last

Go To Msg # Search This Discussion

#34 of 74 Re: Yukon XL 2003 "Popping Noise" when backing up [rsht] by rkg1 Feb 26, 2008 (9:02 am)
Replying to: rsht (Feb 26, 2008 5:58 am) I will try it out!!!   thanks for the great instructions.. i will let you know what happens...
#35 of 74 Re: Yukon XL 2003 "Popping Noise" when backing up [rkg1] by steve_ HOST Feb 26, 2008 (6:18 pm)
Replying to: rkg1 (Feb 26, 2008 9:01 am) ABS brakes have a self test function - usually you hear and feel the test when you first drive away in your car. The sound in many cars is a dull clunk though if you hear it at all, not what I'd call a popping. Sometimes you can feel a shudder through the brake pedal during the self test as well.
#37 of 74 Road Noise by gstorie Mar 31, 2008 (10:32 am)
I have a 2004 Denali and when driving you hear excessive road and engine noise. It almost seems as if there is a door open. I have just purchased a new set of tires and the tire noise is worse. I have had other SUV's but none with noise like this. Am wondering if others might have the same problem. Replies to this message: mready (Nov 05, 2009 5:22 pm)
#38 of 74 Re: 03 Denali rattle in headliner [tpwallac] by flyper Apr 01, 2008 (11:42 am)
Replying to: tpwallac (Dec 11, 2007 6:37 pm) My 06 Denali did the same thing. I became irritated and removed the speaker grate which seemed to do the trick. I think the speaker was rattling against the grate.
#39 of 74 Grinding noise when turning by c650 Apr 13, 2008 (5:52 pm)
When I turn the steering wheel on my 2003 Yukon LX, there is a griding noise, rough feel.  Centered up, no noise.  Noise seems to be from the front, and occurs with the Quadrasteer on or off.  Any help is greatly appreciated. Replies to this message: ahightower (Apr 13, 2008 6:51 pm) rsht (Apr 14, 2008 3:36 am) c650 (Apr 14, 2008 3:51 am)
#40 of 74 Re: Grinding noise when turning [c650] by ahightower Apr 13, 2008 (6:51 pm)
Replying to: c650 (Apr 13, 2008 5:52 pm) Intermediate steering shaft recall?
#41 of 74 Re: Grinding noise when turning [c650] by rsht Apr 14, 2008 (3:36 am)
Replying to: c650 (Apr 13, 2008 5:52 pm) Does the grinding noise appear when you turn the steering left or right or either way, and if the noise appears only when the steering is turned all-the-way to the end? Have you tried to apply the brakes just lightly without stopping the car (when you hear the grinding noise) to see if the grinding noise disappears? If yes, if may be just one of the brake pads rubbing against the rotor... Replies to this message: c650 (Apr 14, 2008 3:51 am)
#42 of 74 Re: Grinding noise when turning [rsht] by c650 Apr 14, 2008 (3:51 am)
Replying to: rsht (Apr 14, 2008 3:36 am) The noise appears while turning to the left and right, just had the brakes completely redone. Applying the brakes has no effect.

Messages Page 5 of 8 1 2 3 4 5 6 7 8 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs GMC Yukon GMC Yukon Noises and Sounds