Last post on Sep 22, 2008 at 1:42 PM
You are in the Nissan Quest
What is this discussion about?
Mercury Villager, Electrical, Van
#1 of 4 Programming a second remote on 97 Villager
Nov 05, 2007 (8:52 am)
Maybe someone has succeeded in this.
I bought a second remote for my Villager 97. Followed the procedure to pair now 2 remotes to the car. No matter what I do, I can't get BOTH remotes to be paired. I can get any ONE of them to pair, but not both.
In the programming step of unlocking and then locking doors using driver door switch, and then pressing Lock on the second remote, the car does not acknowledge the second remote at all!
Has anyone actually succeeded in pairing more than one remote to the car?
#2 of 4 Van will not go into learn mode
Sep 22, 2008 (1:42 pm)
I had to get a new remote for our 1999 Quest. I follow the steps in the service manual to get the van to go into learn mode to reprogram this remote, but the van will not do it. I have tried replacing the driver's side door lock aculator with no luck.
Also when we use the driver's door lock to unlock it from the outside, the alarm goes off. We have to use the passanger door by locking it first then unlocking it with the key.
Any idea what else it could be?